Talisman1

Just the fuse box. There’s two or three bolts holding some plastic piece in under the module I undid those as well. It is definitely doable just takes time and lot of patience.

Hi buddy, Not really. It is the hardest step. Took me a long time to get it out eventually. I used a small pry tool to unclip the two clips going into the module. I did actually break the housing which made it easier and in the end just zip tied the new module and left it like that.

Yeah I did get a key cut. When you get that key fob it comes with a blank blade. Just take that and your current key to an auto locksmith. I paid £8 to get mine cut Hello Bud, Ill explain the whole process in one go. Step 1:First thing I did was look for a replacement module. The module which you want is your convinence control module the one you have currently with central locking (not remote) should be 5J0 959 433. The module you need is 5J0 959 433 A. Check eBay I picked one up second hand for about £30. Once you’ve got the new module Step 2: Locate the old module Yours will be in the same place as mine as I’m in uk too. Assuming you have a RHD its above the clutch pedal. Step 3: Remove the old module You need to remove some lower dash and I found that pushing the fuse box out next to the OBD Port gave me much better access. It’s an absolute pain to get to and get out. Unless you’re small with small hands. I pried mine out of the housing it’s sat in then you need to unclip it from the connection. Has two clips. Step 4: Plug New Module in I thought it would require coding via VCDS but it’s plug and play. Your car will recognise it immediately. I recommend you get the VCDS software as well as the Hex cable as you will need it to program your remote key. Step 5: Pair new remote key The Fob you need is part number 1J0959753DA. I got mine off Amazon for £14. Make sure it’s the right fob or you won’t be able to pair it to the car. To pair the key to the car I found the tutorials for vag remote keys did not work I.e placing in door and turning etc. I used the VCDS software. You need to go to the Central conv module. Go to adaptions and remote key adaption. The default value will be 1 change it to 2 and press save. Click the unlock button on the fob for about a second straight after and you should hear a slight click. That’s how you know it’s worked. For the middle boot button programming if it’s not done by default which was the case for me I had to go to central electrics module on VCDS and go to the remote key boot option and enter the value and save. I just did 3. So I hold the button for 3 secs and it opens. That’s it. You have remote central locking.

Hello Bud, Ill explain the whole process in one go. Step 1:First thing I did was look for a replacement module. The module which you want is your convinence control module the one you have currently with central locking (not remote) should be 5J0 959 433. The module you need is 5J0 959 433 A. Check eBay I picked one up second hand for about £30. Once you’ve got the new module Step 2: Locate the old module Yours will be in the same place as mine as I’m in uk too. Assuming you have a RHD its above the clutch pedal. Step 3: Remove the old module You need to remove some lower dash and I found that pushing the fuse box out next to the OBD Port gave me much better access. It’s an absolute pain to get to and get out. Unless you’re small with small hands. I pried mine out of the housing it’s sat in then you need to unclip it from the connection. Has two clips. Step 4: Plug New Module in I thought it would require coding via VCDS but it’s plug and play. Your car will recognise it immediately. I recommend you get the VCDS software as well as the Hex cable as you will need it to program your remote key. Step 5: Pair new remote key The Fob you need is part number 1J0959753DA. I got mine off Amazon for £14. Make sure it’s the right fob or you won’t be able to pair it to the car. To pair the key to the car I found the tutorials for vag remote keys did not work I.e placing in door and turning etc. I used the VCDS software. You need to go to the Central conv module. Go to adaptions and remote key adaption. The default value will be 1 change it to 2 and press save. Click the unlock button on the fob for about a second straight after and you should hear a slight click. That’s how you know it’s worked. For the middle boot button programming if it’s not done by default which was the case for me I had to go to central electrics module on VCDS and go to the remote key boot option and enter the value and save. I just did 3. So I hold the button for 3 secs and it opens. That’s it. You have remote central locking.

26 DIPP or Zoli I have just completed this upgrade the same as Okku so let me know if you need any help. I have a Skoda Fabia Mk2 2009.

Okku12 if you’re still active on this site I am in the exact same situation as you please can you reply to this. I need your help!