Houndog6105

The company i purchased the dash cam off advised me to use fuse 13 for parking mode wire (power always on) Fuse 13 is central locking, windscreen wipers, headlight washers, headlight tilt function

Just thought I'd update No need to piggyback off any fuses as the car had some empty fuse slots available. After using the multimeter i was able to determine Fuse 23 (power always on yellow wire) Fuse 64 (red wire) Dashcam now up and running 24hr parking also working Hopefully this may help someone else 🙂

I have the enyaq coupe and it's got no rear wiper. I'll use that slot for my power on ignition. Prob piggyback from fuse slot 21 (rear view camera) for the power always on Just waiting for the hard wire kit in the post Which slot are you using for the parking mode anyway?

Hi So you used this fuse slot yes for power when ignition on? I may use this then for my dashcam as it's an empty socket. I just need to pick one for my power always on now for parking mode I'd rather use an empty slot if possible you see

I've purchased a multimeter and hopefully i can just plug the hardwire kit after testing the empty sockets for the 12v. Looks like i will have to use the mini fuses. Here's what I'm going to try Fuse number 48 is spare and in the manual it says its rear USB. I'll try this for the red wire Yellow wire I'm trying fuses 15,16,23,24 and 49 to see if i get power off any of them spare sockets while power is off 🙏 I think you said to leave the car unlocked and keep keys far away from car for 30+mins didn't you to get the power off for testing with the multimeter? Can i ask why did you plug switched red wire into fuse 58 which already had a fuse in? Why didn't you use any of the empty sockets?

Euki support are telling me to piggyback off these fuses

I will show you my dash cam and hardwire kit just to give you a better idea of what i have

Thank god i didn't remove them fuses then 😂 You couldn't recommend piggyback connectors and fuses that would work for me could you please? I really don't know which size to get or anything you see Do you think it's best trying that way before trying the empty slots first? Would it mean maybe purchasing a different hard wire kit even? I don't mind doing that, whatever is easiest really I have a Euki dashcam and it has a USB type C connection to it Thanks again 🙂

Can i just ask can the empty fuse sockets not be used so for example instead of using fuse 21 and 58 which already have fuses in Can i not just use say fuse slot number 16 for yellow wire and fuse slot 53 for red wire

Thankyou for getting back to me It's no piggyback connectors unfortunately. This is what the supplier of the dashcam sent me you see So am i right in saying, remove fuse 21 for the yellow wire and remove fuse 58 for the red wire and that should be good yes? And i won't need to buy any piggyback connectors? All that information is a huge help by the way and i do really appreciate you taking out the time to reply to me

Hi Oliver I came across your post as I'm searching which fuses i can use to hardwire a dash cam to my skoda enyaq coupe. I'll be honest I'm not very clued up when it comes to this but i know that i need a fuse for the red wire (acc power for dash cam to power on and off) of my hardwire kit and the yellow wire (always powered on for parking mode) After looking at a few other posts it sounds like people use fuse 66 (rear wiper) for the red wire but I'm not sure which fuse to use for the yellow wire In my manual fuse 58 is for USB at the rear on my enyaq coupe Could you advise which fuse numbers is best for me to use for the hardwire kit please and also how do i use a piggyback fuse because I'm not sure how I'd connect the wire from the piggyback to my fuses on the hardwire kit you see I'd appreciate any help you can give me Thanks Steve Please find attached My hardwire kit and picture of inside my fuse box

Hi Oliver I came across your post as I'm searching which fuses i can use to hardwire a dash cam to my skoda enyaq coupe. I'll be honest I'm not very clued up when it comes to this but i know that i need a fuse for the red wire (acc power for dash cam to power on and off) of my hardwire kit and the yellow wire (always powered on for parking mode) After looking at a few other posts it sounds like people use fuse 66 (rear wiper) for the red wire but I'm not sure which fuse to use for the yellow wire In my manual fuse 58 is for USB at the rear on my enyaq coupe Could you advise which fuse numbers is best for me to use for the hardwire kit please and also how do i use a piggyback fuse because I'm not sure how I'd connect the wire from the piggyback to my fuses on the hardwire kit you see I'd appreciate any help you can give me Thanks Steve My hardwire kit

Thank you I contacted the lady who deals with it and she's s not in today so i thought I'd just ask about the deposit on here. I did add some extras as i added the clever pack to the order and i think that's why that wanted slightly more towards the deposit. I can't find the contract unfortunately ive just got the price breakdown to hand at the minute

Hello I placed an order a few months ago for a new enyaq coupe and paid a 2k deposit Would i lose all my deposit if i cancel the order?