Skip to content

Mantaraman

New here
  • Joined

  • Last visited

  1. My Mk3 VRS has a double fault with the lights. First is the headlight(s) (and tail lights) come on when I start the car - even in bright sunshine. Sometimes they will switch off after a few minutes. Secondly, the N/S headlamp doesn't come on at all (master switch in manual or auto positions) - but - occasionally it does, for example when I switch off the engine at night and the get-you-home lights turn on, both headlamps work (this doesn't happen every time). Obviously I have fitted a new Xenon bulb and nothing has been disturbed - no new screen etc. Anyone have ideas where to look?
  2. Can anyone shed some light on a headlight problem? The N/S headlamp doesn't work whatever the position of the dashboard and stalk switches with the ignition on, day or night. However, it does come on at night but only when I lock and leave the car - ie for "coming home". I've fitted a new xenon lamp, there are no obvious signs of damage, cable faults etc. The O/S headlight works correctly. Any ideas? Did I read somewhere that there is a re-set procedure? Thanks.
  3. Can anyone enlighten me on what to do with this fault code. The EPC light comes on soon after starting the engine. If I need to replace the switch, where is it? Thanks.
  4. Thanks for your reply. It's rare that you find a completely honest dealer. On the subject of the plugs, I chatted to a very helpful mechanic at the local main dealer and he confirmed what I'd seen on Youtube, you need a good compressed air supply and blow the rubber gaiters/sleeves out which then allows access to the plugs.
  5. I've just bought a 2013 Octavia VRS and don't trust the dealer's word about a service before I collected it. I'd like to change the plugs and have got as far as removing the coil pack on No.1 but the rubber sleeve/gaiter is resolutely stuck in the cylinder head. Is there a recognised procedure to get them out - without damaging them? I've seen a youtube video using compressed air but I don't have compressor/tank man enough for this. Is it a case of cutting them out and replacing with new?

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.