VaclavJnd

Hi there, I have a Swing in Octavia 3. I can not connect to 37 Navi in VCDS. I would like to activate a rear camera there. Can i make an update / change firmware in that radio?

Yes thanks for a comment. If its as you say, It would be what we want, better settings of power management. If normally 12.1V is an basic/normal/average voltage, we can set it to a 12.4V which is nominal voltage for the best battery lifeage. A question is what is the differece between hysteresis elevetation and lowering. As a factory setup is ,,both the same'' It can be probably 12.4V both. But, you also said: Nobody knows... 😉

I am also thinking what does It mean. It could change a recuperation settings. Just my idea: Generator specified voltage variable: probably lowest voltage of alternator? IDE00945-ENG118688-Hysteresis voltage-Voltage_elevation,12.1 V,2 -looks like a voltage when power management starts to charge battery without brake or deceleration IDE00945-ENG118687-Hysteresis voltage-Voltage_lowering,12.1 V,2 -looks like voltage when car display a low battery level on maxidot IDE01211-Static current measuring mode,not activated ,1 IDE01457-Energy management deactivation stage,Mode not active ,1 IDE01459-Energy management heat output control status,Mode not active ,1 We know to deactivate a start stop set a start stop battery voltage from (I think) 7.6 to 12.1V, but battery is still on really low level which shorts a lifeage from a years to probaly 3years...