blacky14
Finding my way-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Everything posted by blacky14
-
Hello guys! I have a so3 fl 2017 and i wanted to replace both bumbers with vrs bumpers. Does anyone did it? It's "plug and play" or do i need any changes? Also the grill from the top, can be placed from the oem bumper to the vrs one or has other clips?
-
Update on the same probleme, it got worse i think, i will put a video below https://youtu.be/RvVzMtAmFTE?si=RpRla7iQRtp3F-iA
-
I ll try, but don t have any
-
Just some error for the eletric trunk
-
Hey guys, i have a weird situation going on with my car. The car, o3 2017 2.0tdi, has second hand warranty. The problem is this, recently it started to loony, a sound like a injector, but not like that... I went to warranty and they said the only thing i didn t expected, it s the vacuum pump and it s a normal sound, they have a information from the factory that this sound is normal. Has anyone have a same sound/issue? I went to a shop and they said it might be a cleat that isn t lubricated enough. They put a tester on and i ll put some pictures. Any ideas?
-
Adaptive Cruise Control retrofit
blacky14 replied to East_Yorkshire_Retrofits's topic in Skoda Octavia Mk III (2013 - 2020)
Hey guys! I have a question, i want to retrofit ACC on my '17 o3, i have front assist but manual transmission, could be possible? -
Hello guys! Question, can i replace the oem bumpers with vrs bumpers? I have o3 fl 2017 and wanted to give it new looks, is it possible to just buy the vrs bumper and change it or do i need other adaptantions?
-
Maybe a problem with haldex?
blacky14 replied to blacky14's topic in Skoda Octavia Mk III (2013 - 2020)
Update. It s the wheel bearing, but it s so early on and that is why is sounding only when turning. At the shop, they lifted the car, and accelerate and it sounded like a bearing when going forword. so yea, wheel bearing. -
Maybe a problem with haldex?
blacky14 replied to blacky14's topic in Skoda Octavia Mk III (2013 - 2020)
Oh, oke than. Thank you very much! -
Maybe a problem with haldex?
blacky14 replied to blacky14's topic in Skoda Octavia Mk III (2013 - 2020)
Thank you guys for your replies, new update. Today i found out that if the car is in neutral (Manual Transmission) the sound is gone. I went to a shop and they said i should bring the summer tires and see if the sound is still there after i run with them. They said it may be a bearing but then, why is the sound gone when i m in neutral? Also, i taked the 4x4 fuse that s inside the car out and the sound is still there. Is there any other fuse that i don't know about? -
Hey guys! I have a wierd problem with my o3 fl 4x4 2.0 tdi mt, when i turn left, it makes a sound, something like when your break pads are worn, but not quite, more like a rumble or something. The sound is coming from the front wheel, only when the car is drivien and in the range of 10-70km/h, when i steer while stationary it's ok, no other simptoms, no vibrations in steering wheel. The dealer said it could be from the wheels, but i changed them and still does the same. They said that mechanically it's perfect. Any ideas? Could be something with haldex?
-
Hello, so i finally did this to my car and it works perfectly with the setting SpaceWalrus gave me. For anyone that want to do it. I want to mention that i have kessy and for me it works, with the error that the key is not in the car and you can lock it/unlock it only with the buttons on the key.
-
Ok, thank you very much, i ll try it tomorrow and let you guys know
-
I forgot to mention, i have kessy, is this still avalible?
-
Hello guys, kind of new here, new owner of a octavia 3 facelift 2018. Is it possible to lock the car form outside with the engine running with VCDS coding? Do i need some module or just coding? I was looking in VCDS Coding tried and tested and didn't find anything like this. Thank you in advance for your answers!
-
Hello guys, i ' m a new owner of a skoda octavia 3 fl, with ambient lighting, now i have a big question. Has anyone changed the green colour of the buttons? If so, how to do it, is it hard, what do you need? I would want, if possible, to mach the ambient light with all the bottons.