blacky14

Thank you very much. Your answer helped me a lot. I will probably try to put the b4 on it and see if it fits. Also i will speak with some Bilstein importers in my country about the compatibility.

For some reason the b4 dosen t fit, as autodoc says in live chat... Also i have 2.0 tdi 150hp I also spoke with a skoda dealer and they said that the ones on my car are somehow special ... I ll leave a photo down for you guys to understand and tell me if it s ok to put b4 or even b6. Also, if i will find the dimension of the original one it will be easy for me to find an aftermarket one that fits but even that i couldn t find anywere...

Hello guys, Skoda Octavia III Facelift 4x4 MT here, i have to change my rear shock absorber and i was wanting to put Bilstein B4 on her. The problem is that no shop has the ones that fits my car, the OE code is: 5Q0513029MQ and the Bilstein cod 19-230559 isn't fitting. Do you guys have any idea what after market shock i should buy or even if one exist? Also, i don't have DCC on my car. i called almost every shop in my region and all of them said there is no after market shock for my car, only the OE wich is quite expensive.. almost 200 euro per unit ...

Can i do it via vcds or do i need something else?

Hello! Skoda Octavia 3 2.0 tdi 4x4 MT here. I have a problem with my car, it started around 3-4 months ago, it will take long to start, but not every day, usually when it sits for more than 1 day. Now it s almost everyday. I want to mention that this is the first start of the day, the next ones are ok. The battery is kind of new (nov. 2023), the service said it doesn t need coding so it s not coded. I monitored a few days the voltage and it is ok (between 12,4-12,7). I checked with vcds, i don t have any erros. Any ideas, someone that had the same problem? I will put a picture with the injector values that i have and 2 videos with the starting. https://youtube.com/shorts/-ljoEJ-tHmE?si=0WRIk4C01w7QL1YB https://youtube.com/shorts/WtdC9YNZx3M?si=W67cP6b57WLj4vrN

Hey guys🤙 Octavia 3 facelift 4x4 MT with standard shocks. Is it possible to retrofit DCC? What do you need? Currently my stock shocks are leaking and i have to change them so i was thinking to "upgrade it" but don t want some stiff shocks and also don t want some soft ones. I usually drive normal but sometimes i want to have fun, so i got to the conclusion that the dynamic suspension is what i need. Any thougths?

Hello guys! I have a so3 fl 2017 and i wanted to replace both bumbers with vrs bumpers. Does anyone did it? It's "plug and play" or do i need any changes? Also the grill from the top, can be placed from the oem bumper to the vrs one or has other clips?

Update on the same probleme, it got worse i think, i will put a video below https://youtu.be/RvVzMtAmFTE?si=RpRla7iQRtp3F-iA

I ll try, but don t have any

Just some error for the eletric trunk

Hey guys, i have a weird situation going on with my car. The car, o3 2017 2.0tdi, has second hand warranty. The problem is this, recently it started to loony, a sound like a injector, but not like that... I went to warranty and they said the only thing i didn t expected, it s the vacuum pump and it s a normal sound, they have a information from the factory that this sound is normal. Has anyone have a same sound/issue? I went to a shop and they said it might be a cleat that isn t lubricated enough. They put a tester on and i ll put some pictures. Any ideas?

Hey guys! I have a question, i want to retrofit ACC on my '17 o3, i have front assist but manual transmission, could be possible?

Hello guys! Question, can i replace the oem bumpers with vrs bumpers? I have o3 fl 2017 and wanted to give it new looks, is it possible to just buy the vrs bumper and change it or do i need other adaptantions?

Update. It s the wheel bearing, but it s so early on and that is why is sounding only when turning. At the shop, they lifted the car, and accelerate and it sounded like a bearing when going forword. so yea, wheel bearing.

Oh, oke than. Thank you very much!

Thank you guys for your replies, new update. Today i found out that if the car is in neutral (Manual Transmission) the sound is gone. I went to a shop and they said i should bring the summer tires and see if the sound is still there after i run with them. They said it may be a bearing but then, why is the sound gone when i m in neutral? Also, i taked the 4x4 fuse that s inside the car out and the sound is still there. Is there any other fuse that i don't know about?

Hey guys! I have a wierd problem with my o3 fl 4x4 2.0 tdi mt, when i turn left, it makes a sound, something like when your break pads are worn, but not quite, more like a rumble or something. The sound is coming from the front wheel, only when the car is drivien and in the range of 10-70km/h, when i steer while stationary it's ok, no other simptoms, no vibrations in steering wheel. The dealer said it could be from the wheels, but i changed them and still does the same. They said that mechanically it's perfect. Any ideas? Could be something with haldex?

Hello, so i finally did this to my car and it works perfectly with the setting SpaceWalrus gave me. For anyone that want to do it. I want to mention that i have kessy and for me it works, with the error that the key is not in the car and you can lock it/unlock it only with the buttons on the key.

Ok, thank you very much, i ll try it tomorrow and let you guys know

I forgot to mention, i have kessy, is this still avalible?

Hello guys, kind of new here, new owner of a octavia 3 facelift 2018. Is it possible to lock the car form outside with the engine running with VCDS coding? Do i need some module or just coding? I was looking in VCDS Coding tried and tested and didn't find anything like this. Thank you in advance for your answers!

Hello guys, i ' m a new owner of a skoda octavia 3 fl, with ambient lighting, now i have a big question. Has anyone changed the green colour of the buttons? If so, how to do it, is it hard, what do you need? I would want, if possible, to mach the ambient light with all the bottons.