adam3278

Ok, I see that I need proper shifter, radar and abs module installed, based on the thread As far as I know, I need to change shifter only and code it. Is the obd11 capable of enabling feature codes, or I would need help from vag retrofitter with proper software?

I don’t know if I would be able to code it manually by myself, but there’s also one click app in obd11 especially for that. Maybe coding isn’t the problem, but parts are. I don’t know do I need to replace something other than shifter? In my octavia III there was a talk about some pump when I wanted to do the same thing, but there was no front assist too.

Hello, I want to retrofit virtual cockpit into my 2022 skoda scala 1.0 TSI. I know I would need to buy and mount display unit 654920790A with fiber cable, but something else? Is it enough with proper coding? Would the display fit the current meters frame? Is the meters unit locked with car vin? Can I unlock old unit and new unit with obd11? Thanks for help me to figure it out!

Hi, I want to retrofit active cruise control into my skoda scala 2022 1.0 TSI. The car has front assist and standard cruise control. I know, there is a need to change shifter to 5Q0953521MG/5Q0953502AL/5Q0953569F, but do I need something else? Of course I would apply proper coding via obd11. Thanks in advance for help.

Hello, I have a problem with my bolero mib system. I use it with carplay mostly, but it crashes quite often. The screen freezes on connecting phone (even the loading spinner) or just can’t connect to it (re-pluging doesn’t help) and need hard reset (power button long push). The local authorized service LELLEK said they don’t have any updates and cannot help me. I consider replacing the whole mib with android box (https://a.aliexpress.com/_EvS2icn S4), but I don’t need anything else than carplay and reverse camera (already installed). Is it possible to repair this crashing issue? I use iPhone 14 Pro Max with newest iOS. Thank you in advance!

Hi, Thank you for your response. I wanted to upgrade car functionality. This alarm kit adds PKE (Kessy), Start button, and most wanted phone unlock functionality with remote start (I don’t have webasto and it causes problems in winter). I will think about using canbus adapter if I find one.

Hello, I’m trying to install the aftermarket Easyguard EC002 alarm system into my Skoda Octavia 3 2019, but without huge success. I need to find ignition wires (ON, ACC, starter), central locking wires (unlock, lock), horn wires, footbrake wires, trunk wires(release, motor), fuel pump wires (used to determine success car start), signal lights wires. I know where to find power and ground. I also found to use aftermarket ignition switch part and modify it as a terminal for alarm wires (and also learn how it works to connect them correctly). I think the most of the cables I need are located inside the comfort module (bcm) connectors, but I’m not 100% sure which ones to use. After reading the electrical pinout, I think about C14 (wale up wire), C31 (interior button) and C33 (central locking lock unit). Can anyone help me to manage to install the alarm system? Thanks in advance.