Z@gor

Hello everyone. Until a year ago I had a Yeti 1.6 TDI model 2012 with light/rain sensor 1K0 955 559 AH retrofitted and the rain closing worked perfectly. Now I have this new Yeti model 2017 Executive Equipment with light/rain sensor 5K7 955 559 C, but there is no way to make the rain closing work. As far as I know, this automation works with the windshield wiper lever in the intermittent position, the light switch in the "Auto" position, the car closed with the remote control for at least two minutes and the rain closing function enabled in the MFA comfort menu. I tried to fit 5Q0 955 547 and 81D 955 547 A, but they are only detected by enabling LIN 2.0 in the BCM and, so the windshield wiper motor - rightly - is no longer detected. Then I also tried to fit 5K7 955 559 B and 5K7 955 547, both are detected without changing the LIN BUS protocol, but the rain closing still does not work. I have tried all possible (and suggested) codings, both in the BCM and sensor, but still without success. Therefore I would like to know first of all if anyone owns a Yeti from 2015 with this functionality working, then which sensor code is mounted and which are the BCM and sensor codings. Thanks to anyone who can help me clarify the reason for the problem

Yes, thanks, maybe I'll try in that section 😉

Result: RLHS with spare part code 5Q0 955 547 x and 81D 955 547 x are not detected by my BCM. One more info: in reality, by modifying the LIN BUS protocol in the coding, the BCM PQ35 - at least those produced from about 2015 onwards - also correctly detect the RLHS with spare part code 5Q0 955 547 x and 81D 955 547 x. The unpleasant aspect, however, is that the windshield wiper motor electronics are no longer detected... 🤣"

If it is useful to add me to the map: I have VCDS HEX NET unlimited, obd eleven and VCP. All official tools. I am in Rome, Italy

Hello everyone. Sorry to dig up this old 3D, but I have some doubts and I hope someone can clarify them. I have a Yeti 2017, so almost entirely PQ35, apart from the MIB2 (Composition Media 5L0 035 200 D). The BCM is a 1K0 937 087 AR. The factory RLS is a 5K7 955 559 C and even trying various encodings the rain closing never worked. Replaced with 5K7 955 559 B but same result. I know that to have this function I have to mount an RLHS, so I took a used 81D 955 547 and a 5Q0 955 547 (both without final letter) to do some experiments. Since my Yeti is entirely PQ35, obviously on BCM and 5F I don't have advanced functional settings relating to the light/rain/humidity sensor. Do I have any chance to successfully activate this feature? If so, with which RLHS encoding? Thanks to anyone who can help me.

Hello everyone. A friend with an Octavia SW my 2021 asked me for an upgrade from the low version rear lights (PR 8VG) to the high ones (pr 8VQ). I would need the BCM dataset of both the high and low versions. I attach the photo of a dataset (obtained on another forum) with PR 8VQ, but from a Seat Leon. I need the one circled in red. Thank you so much and great respect to whoever will be able to help me!

Per fortuna valeva la seconda ipotesi. Dato che i lampeggi comfort erano già impostati a 5, ecco la sequenza di operazioni che hanno risolto il problema: - dal menu impostazioni "luci e vista" su MFA+ ho disabilitato la funzionalità comfort sugli indicatori di direzione - ho abbassato leggermente la leva degli indicatori di direzione e ha avuto un solo lampeggio - ho riattivato la funzionalità comfort sugli indicatori di direzione e alla fine i lampeggi sono diventati 5 Grazie a tutti! 🤗

Does anyone know why the comfort flash cycle does not change in any way from the standard 3 cycles on BCM 1K0 937 087 AR? After setting 5 cycles I tried every type of reset possible with Odis S-E, VCDS, VCP. I also reset to standard the settings lights and comfort, both from the instrument panel 17 and from the 5F MIB. Maybe it's possible by acting directly from the eeprom? I can read and write its contents via VCP without any problem I have two theories: 1 - BCM is not able 2 - the "owner" of the light/comfort settings is the MFA+ Assuming first theory as wrong, I have to work on second, because I think the "owner" can be changed via some settings of 17 and/or 09 controllers