Jopega

Hello, I made a change to the first byte of the 5F long coding, where the vehicle is indicated. It was set to Skoda Yeti, and I had tried Skoda Superb Limousine, but now I've tried Skoda Superb Estate (my car is the regular sedan). For the past week, the reversing camera has been working every time, although occasionally the image is distorted. Regarding the AM setting, it was set as you indicated in your message, so it still doesn't work. Finally, to fix the time issue, it says I need to update. How can I do that? My radio is unlocked and has Green Menu Engineering.

Hello, thank you for your time. Here are my answers: 1. The camera's negative terminal is connected to the car's ground, and the positive terminal is connected via a relay. I've tried activating this relay in two ways: one from the reverse light, and the other from a module that simulates a Skoda Yeti and has a wire to activate the camera. The result is the same: sometimes it works, and sometimes it doesn't. 2. I understand that this is normal; it's a very useful function. However, since it stops powering the camera, the screen goes black, which isn't helpful. I don't know if a time-delay relay could keep the camera on for that amount of time. 3. I thought there was a way to fix this without having to mess with the instrument cluster. 4. I've looked in module 5F, and I can't find where to activate the AM radio. Thanks again.

Yes please

Hello, I have a 2011 Skoda Superb II, into which I installed a Mib STD2 PQ (without navigation) from a Skoda Yeti, with a jailbroken CP. I have Android Auto, which is what I needed, but I'd like to solve these problems: 1. I have a non-original reversing camera, and sometimes it displays on the screen and sometimes it doesn't. When it does display, the image is sometimes distorted. I've noticed that if I reset the unit by long-pressing the button, it always works the first time, but after that, it's inconsistent. 2. When the camera is working, there's a delay of about ten seconds from when I disengage reverse gear until it returns to the initial screen, which then goes black. 3. The well-known clock error; it only displays 0:00 or 6:28. 4. I can't find how to enable AM radio; I only have FM. I understand that this unit should work in both AM and FM, since it has a combined input for both antennas on the back. I have VCDS and ODIS, but I don't know how to fix this. If "pab567" or someone else can help me, I would appreciate it.