Nejt

I may be very late but, can anyone tell me exact name of the first wheels please?

Engine is running smoothly without any issue. I will try to replace engine mount on the left side and engine mount which is also transmission mount on the right side. Hope It will help.

Hello, does anyone deal with idle vibrations on steering wheel, arm rest and also a little bit in seat? Its not a big problem, but definitely I can feel big difference from last week. I am about to change engine mount on the left side and on the right side which is also for transmission 5Q0 199 262 BJ + 3Q0 199 555 G 2017, 4x4 DSG Also, vibrations not changing when shifting from P or R or D, its always same so it shouldnt be gearbox..

Hello, me again, so Im about to change it but I just cant find egr location. There should be two, one right "under" plastic engine cover and one close to DPF. Any chance that you know which one they replaced for you? Red circle one is better for replacement - should be 04L 131 501 AD many thanks!

Thanks!

Hello, Im facing same issue, same codes, deleted codes and nothing coming back im also expecting the worst How it ended?

Hello everybody, today after oil change + fuel filter/air filter I grabbed my VCDS and tried to reset service oil + set new interval of changing oil from 30 000km to 10 000km. After this, I was courious if anything new appeared in errors, my last check up was last year in november. So I went to read all faults and all was clear ,but in engine I had two faults. Before I read this faults with VCDS, I didnt have any check engine on my instruments, but immediately after reading faults engine check appeared. P046C00 and P040500 One si from 2024 and without engine check light till now. But second one appeared right after I scan it - 144 000km Car is running normally, without any issues. So I deleted it, drive for another 10 kilometers, stopped, check VCDS again and it was clean. Now Im courious, if this is some random abnormaly or should I expect the worst? I dont have genuine VCDS, but so far it worked very well and read everything right. Could this be also fault reading? Why check engine appeared after I read the fault codes and no before reading? Thank you very much and sorry for my bad english also.

So actually I google little bot more and found this topic Its exactly like mine problem, but where I can find this temperature sensors in MK III?

I tested it in two ways: outside, where the temperature is high - around 86 Fahrenheit (30°C) , but I also tested it in the garage, where the temperature is around 75 Fahrenheit (24°C) AC is working great. Also, there is one fault code in VCDS but for sure it has no connection with my problem. B10AF04 - Air quality sensor Faulty Intermittent

Hello, can anybody help me please? The warm air in my vehicle is acting strangely. If I set any value from 60°F (16°Celsias), it blows lukewarm air, and only when I set on the button maximum temperature and "HI" appears, it starts blowing very warm air. I performed a basic flap calibration in VCDS, but it didn't help. Nobody can help me, has anyone experienced this, please? Superb MK3 2017