Everything posted by Chris_24
-
Gearbox Issues
I forgot to specify that after some time ( seconds ) all gears work normally, still a linkage problem? ( Btw thanks )
-
Gearbox Issues
Im gonna have to check the selector out later
-
Gearbox Issues
i think they just replaced the clutch because they didnt tell me anything else
-
Gearbox Issues
how do i even bleed the clutch
-
ESP Light turns on and stays on until the car is shut down
-
Gearbox Issues
Hello, someone might have read this topic made by me about changing the gearbox, ( this new topic is basically the "sequel" to the old one ) anyways When the generic mechanic opened the original gearbox, he found everything in good shape, nothing broken or worse. so he told us not to change the gearbox and gave us the car back. ( Note: the skoda service center said it had to be replaced at a mindblowing 7500 €, thats why we told them to pack it up to bring it to the generic mechanic, the car drove fine for around 200km- ish ) This evening, after a roundabout, the gears would not engage, basically the car was forced in neutral, after stopping to the side we engaged the reverse gear, then shifted through all the gears to try and "debug" it, it actually worked and we could continue driving. after about 1.5 km or so the same thing happened, so we did the same thing but when i arrived to 5th and 6th, they would not engage, not even a chance, but we didnt need them at these slow city speeds, so we continued again. When i arrived home we couldnt engage 1st, so again we did the same thing and magically all the gears began to engage normally. What the hell is happening here?! i was told the gearbox was fine and it now gives these issues? ( Note that the Clutch was replaced by the service center ) anyone has a clue on what this car has?
-
Double Floor retrofit?
I only found the top rubber carpet, nothing else
-
Double Floor retrofit?
-
Double Floor retrofit?
Thank you so much for searching this much man, cheers
-
Double Floor retrofit?
-
Double Floor retrofit?
Nono i mean like the full double-floor assembly, i got the stock things without the spare wheel assembly
-
Double Floor retrofit?
Well, i cant find original parts for the double floor of the luggage compartment, does anyone know where can i find them? i found this picture but i cant find the pieces on sale anywhere
-
ESP Light turns on and stays on until the car is shut down
nope, classical key fob and no cruise control 😀
-
ESP Light turns on and stays on until the car is shut down
Yup, what about the ABS control unit error 01314?
-
ESP Light turns on and stays on until the car is shut down
oh silly me i forgot to turn off the car 😅
-
ESP Light turns on and stays on until the car is shut down
UPDATE: I cleared the undervoltage codes, they were really old and they were from the past battery, the only codes that remained are the following ( after reading 195~ DTC ) Car Scanner ELM OBD2 DTC report Selected brand: Skoda Selected model: Yeti ( 5L ) Engine: 1.2 TSI VIN: TMBJF65L2E6016021 ============1============== P0441 Raw code: 0441 ECU: Engine control unit Status: Pending Evaporative emission (EVAP) system - incorrect flow detected Evaporative Emission Control System Incorrect Purge Flow ============2============== 11003 Raw code: 002AFB ECU: Engine control unit Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle ============3============== 06330 Raw code: 0018BA ECU: Engine control unit[Archive (inactive)] Status: Test failed since last DTC clear, Test not completed during this operation cycle ============4============== 01314 Raw code: 0522 ECU: 03. ABS control unit Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Validated and stored in non volatile memory Engine control unit ============5============== 11003 Raw code: 002AFB ECU: 01. Engine control unit Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle P044100: EVAP Emission Contr.Sys.Incorrect, Purge Flow ============6============== 06330 Raw code: 0018BA ECU: 01. Engine control unit[Archive (inactive)] Status: Test failed since last DTC clear, Test not completed during this operation cycle P307A00: Intake system, Air flow too low
-
ESP Light turns on and stays on until the car is shut down
Strangely enough the battery is approxximately 4 months old And the tests on the battery shows 14V ~
-
ESP Light turns on and stays on until the car is shut down
Ok thanks! i dont think i need to raise the car a bit because the wheels are actually big 😆 ( finally i got my hands on 4-seasons 215/60 r16! )
-
ESP Light turns on and stays on until the car is shut down
Sure! will do it later, about the reluctor rings where are they located? Cheers!
-
ESP Light turns on and stays on until the car is shut down
This car definitely has issues... ABS doesnt pop up tho.... Car Scanner ELM OBD2 DTC report Brand: Skoda Model: Yeti Engine: 1.2 TSI ============1============== P0441 Raw code: 0441 ECU: Engine control unit Status: Pending Evaporative emission (EVAP) system - incorrect flow detected Evaporative Emission Control System Incorrect Purge Flow ============2============== 11003 Raw code: 002AFB ECU: Engine control unit Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle ============3============== 00532 Raw code: 0214 ECU: 09. Onboard supply control unit Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory Supply voltage ============4============== 00446 Raw code: 01BE ECU: 09. Onboard supply control unit Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory Work restriction due to insufficient voltage; Functional restriction due to undervoltage ============5============== 11003 Raw code: 002AFB ECU: 01. Engine control unit Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle P044100: EVAP Emission Contr.Sys.Incorrect, Purge Flow ============6============== 13635840 Raw code: D01100 ECU: 17. Dashboard[Archive (inactive)] Status: Confirmed ============7============== 00446 Raw code: 01BE ECU: 42. Driver door electronic equipment[Archive (inactive)] Status: Validated and stored in non volatile memory Work restriction due to insufficient voltage; Functional restriction due to undervoltage ============8============== 00446 Raw code: 01BE ECU: 52. Front passenger door electronics[Archive (inactive)] Status: Validated and stored in non volatile memory Work restriction due to insufficient voltage; Functional restriction due to undervoltage ============9============== P0441 Raw code: 0441 ECU: Engine control unit Status: Pending Evaporative emission (EVAP) system - incorrect flow detected Evaporative Emission Control System Incorrect Purge Flow ============10============== 11003 Raw code: 002AFB ECU: Engine control unit Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle ============11============== 00532 Raw code: 0214 ECU: 09. Onboard supply control unit Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory Supply voltage ============12============== 00446 Raw code: 01BE ECU: 09. Onboard supply control unit Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory Work restriction due to insufficient voltage; Functional restriction due to undervoltage ============13============== 11003 Raw code: 002AFB ECU: 01. Engine control unit Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle P044100: EVAP Emission Contr.Sys.Incorrect, Purge Flow ============14============== 13635840 Raw code: D01100 ECU: 17. Dashboard[Archive (inactive)] Status: Confirmed ============15============== 00446 Raw code: 01BE ECU: 42. Driver door electronic equipment[Archive (inactive)] Status: Validated and stored in non volatile memory Work restriction due to insufficient voltage; Functional restriction due to undervoltage ============16============== 00446 Raw code: 01BE ECU: 52. Front passenger door electronics[Archive (inactive)] Status: Validated and stored in non volatile memory Work restriction due to insufficient voltage; Functional restriction due to undervoltage
-
ESP Light turns on and stays on until the car is shut down
Ok as soon as i can i will connect my obd thing, i will update yall!
-
ESP Light turns on and stays on until the car is shut down
Hello, this problem first appeared 1 year ago but i didnt think much of it, yesterday, it happened 5 times, the tires are 4-season litterally new, the road was dry, i tried looking on the forum but i haven't found anything like this.
- Yetii.jpg
-
Intense Petrol smell from car hood and inside the cabin with the filter disengaged
the whistleblower system maybe ( nope )
-
Intense Petrol smell from car hood and inside the cabin with the filter disengaged
Amazing lawsuit incoming! ( Just kidding, maybe... ) Incase they make me pay for the damage they did 😂