noxik600

Sure, I'm like a translator 😄 Applications » [ Channel Assignment] » Target Access and Security – Whole Vehicle (CAN Only) // To back up only a specific unit, select "ECU Address" and enter its number, e.g. 5F – Electrical Information // Function – Assignment Recovery – Raw Hexadecimal Format Only Hexadecimal format can be used for recovery.

Hello, with KESSY – the keyless entry system – you can unlock your car at any time using the door handle after locking it. ANYONE can unlock the door. It's better to keep the key in your pocket and never take it out.

Anwendungen » [Kanalzuordnung] » Ziel- und Sicherheitszugriff – Gesamtes Fahrzeug (nur CAN) // Um nur eine bestimmte Einheit zu sichern, wählen Sie „Steuergeräteadresse“ und geben Sie deren Nummer ein, z. B. 5F – Elektrische Informationen// Funktion – Anpassung Ausgabe – Roh-Hexadezimal Nur das Hexadezimalformat kann zur Wiederherstellung verwendet werden.

Before making any changes, note down the original values. Incorrect coding can adversely affect the function of the control unit; you are responsible for this. If the off-road menu does not appear on the radio after coding, restart the radio by holding down the power button until the radio restarts. It works for me: 5F - Electrical info » [ Security access - 16 ] » S12345 » [ Adaptations - 10 ] » ENG122229-ENG117732-Car_Function_List_BAP_Gen2-compass_0x15 » New value "Activated" ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass » New value "Activated" ENG122227-ENG117568-Car_Function_Adaptations_Gen2-menu_display_compass_over_threshold_high » New value "Activated"

Hello. VCDS coding – locking after leaving the vehicle – successful. But when I walk to the rear doors, they lock. Can this be set to, for example, 3 meters from the ignition switch?

So, to revive the topic: has anyone done VCDS coding on their Karoq and did it work? I have: GREEN score tracking Offroad menu Rear lights during daytime running lights Power steering stiffness (harder) Locking the car when starting Compass display Oil temperature on OBD Closing windows against rain - not possible, in group 09-->07 there are only codes 0000000000 - coding here is not possible. The menu shows Wiper mounting position - not possible