nick!!!!!!!!!!

Hello All, Advice needed please, I have an 11plate octy cr170 dsg that I am considering giving a lttle more power. I like the idea of a bluefin so I can switch back to standard if needed, but I previously owned a fabia Vrs pd130 which had a vicious remap and other usual mods. I loved the car to bits :( Anyway..what I want to know is, can anyone give me any insight on how this performs with a bluefin or remap and any issues I might come across. I'm not looking to go mad with mods, just put a grin on my face Thanks

hi can anyone tell me if there is a guide for changing the front brake pads on a fabia vrs. cheers

Hi is there a guide for changing front brake pads on a fabia vrs? or could anyone link me to it? Thanks

cheers

Can anyone link me to the guide for the elephant hose mod? Thanks

187bhp 323ft/lbs

I will batter it with spray grease, i give it a good dose of WD40 which cleared the noise for a while. All the bushes have just recently been replaced at awesome, checked the drop links and they seem fine. Thanks for the advice

Hi I have a creaking/clunking noise coming from the top of my shock absorber. if you hold the spring you can feel the vibration/knocking through it as you turn the wheel. you can see it sticking and clunking as it frees off. is there an easy fix for this? BEARING/BUSH replacement? Thanks : :S

cheers lads

Can anyone help. whilst checking on a steering problem i decided to remove the sump guard. when i dropped the guard i noticed oil all over it under the intercooler. i checked it over and both top and botton hoses are bladdered in oil. can anyone advise what this will be?? i can only think of oil coming through the turbo. Thanks

The jabba one is single mass. if your getting a stage 1 remap then its overkill in my opinion.

Personally i'd change the flywheel, i had mine changed at 20000 but it was battered. if the labour costs are so cheap then it would make sense to pay the extra and put a new flywheel in. Cost me £1100 for a sachs clutch & flywheel.

i agree with the last 2 posts, definately not normal. my mates turbo made a whinning noise, it had bent the shaft. oh and when mine went it cost 1500 because i also damaged the intercooler..if it needs replacing do it asap.

nickythehitman