Apoelara

Hello, I have a similar problem too. The boot does not close properly. I have realised that when the small "boot door" is completely open there is current going through but when it is near the closing position there is no current. I managed to figure this out when I opened the boot slowly-slowly and at the same time I was measuring the current. So the reason of not closing properly is that the motor that the locker is connected with when the boot door is closed was not having current. So I think that I have the same issue with the wire as explained above. My problem is how to reach to the wires as the "large door" (hatch mode) cannon open. How can I remove the plastics? Please help. Thanks a lot.

Hello, I have this (or similar) issue for 2 days. The boot opens as expected (with the boot button on the key), but when I push it to close I can hear the first click but then the motor does not pull the boot at it's normal position. As a result the indicator inside the car shows that the boot is not open. Do you think it's the switch just above the wires (see Greenliner1's first photo). Thanks a lot.

Have a look at the topic: rSAP - Samsung Galaxy S2 working-http://briskoda.net/forums/topic/201367-rsap-samsung-galaxy-s2-working

I got my Galaxy S2 few days ago. It has v2.3.5 I had the same problem with some contacts from my phone book. After a closer look to these contacts I realised that they had some notes transferred on my galaxy’s phone contacts when I synchronised the phone with windows outlook. The notes were created when I was saving a contact using my old HTC. I then removed all these notes from each contact and now all my contacts are downloaded to the car.

Anyone knows if Samsung Galaxy Note and the newer version of Samsung Galaxy S2 (LTE) supports rSAP profile?

How can you turn on rSAP on Samsung Galaxy S2? On my HTC touch hd there is an option to turn on SAP. Is there something similar? Thanks

I called them yesterday and they say there is no campaign for my car. I bought the car new april 2010. A label on the machine where CDA is written there is something like a manufacturing date, March 2010. Probably this can help someone to check affected manufacturing dates.

Is this list avialable somewhere apart from the dealers?

So your car is not affected. When did you buy the car. Or when your engine was produced?

Well I cannot explain how the noise is heard. What exactly is a tapping noise.

Is there a databease to check the engine numbers if they are included in the "defective" engines?

I also have some noise comming from somewhere like a ticking noise. This noise can be heard after 10 minutes from start up. Sometimes stops after driving for some more time. I have noticed (test it 2 times) that when the oil temperature is 100 degrees it stops. Has this anything to do with the recall?

Anyone knows when this Campaign started? I had my car for service on 10th of May and they never told me anything. I have asked them yesterday and they say they will check my car's engine code again and they will inform me.

If you are talking about my comments, I cannot hear it in the video. My post is referring to ringing??? I really cannot describe it in english.

Sometimes I can hear a noise(I don't really know how to describe it, it's like very small bell which can sound in high frequencies!!!) when the car is at P, R or N. In D and S is a quite similar and always when it's stopped (e.g. traffic lights). Sometimes I can hear it when moving really slowly. All the above when no radio is on and when window is open. When I asked at the dealer they say this is common, but I have never test another car. Can anyone hear any such noise?