stevie.d

When I had mine fitted to my yeti it was only the highest settings it didn't like. The rest were fine. Start off at the lowest and work your way up till your happy with the performance.

Thought I recognized both these roads. Was that your test drive route from Specialist cars?

See what we buy any car offers. Gives you another route if need be.

Here's mine after coating it in Cquartz 3.0 yesterday.

Cant the beeps be turned on in the settings on the stereo? Switched the locking beep on mine through that

Here's mine after its first wash since carrying out a full decon and then giving it a good going over with Car pro Essence then two coats of Zymol Glasur.

Will try and get a couple of pics over the weekend for you showing where I run the cables.

Fitted a sub in mine easily enough Biggest hassle was finding a place to run the cables from the battery through from the engine bay and ended up running them along the bonnet release cable grommet.

I bought a 5m usb to mini usb cable and a usb car charger then run the cable for my camera round the windscreen and down below the dash to the 12v plug. You have to plug it in every time you use the car but it also allows the camera to be left on while parked up at the shops etc if needed. Takes minutes to remove the cable and no damage is done to the car Have bought both cameras I use here from amazon after looking into reviews for them.

Reduced to £100 plus postage

I loosened the battery and moved it over a few inches for a bit more space when doing mine and it helped massively. There's not much free cable but it saves removing it and causing problems.

Price dropped to £110

Think it can be reprogrammed for that engine but it wont work straight out of box with it as far as am aware

is it the 110ps variant?