Jump to content

logan2769

Members
  • Posts

    33
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    Southampton

Car Info

  • Model
    octavia vrs petrol

logan2769's Achievements

Contributor

Contributor (5/17)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

3

Reputation

  1. Hi all , Just a follow up in-case any of you have a similar problem, Crank sensor replaced car now running well,the part cost £111.00 at TPS and i got it fitted for £66 ,If you go to a garage and they tell you you need to take the oil filter housing off then shop else where . the first quote i got was £250 plus vat (that included the part ,works out they wanted £150 for the sensor !!) so it pays to shop around . You could fit this yourself if you have access to a car ramp ,I had a go of normal ramps and you don't have enough ground clearance for £66 it's a no brainer.
  2. Can someone shed some light on how easy this sensor is to fit ,I have been quoted £250 for this job to be done ,If it not to hard having to work under the car then I will have a go myself.
  3. Thanks DGW i have looked at this as well ,most websites that quote the fault code always seems to be related to Diesels ,I haven't found 1 yet that mentioned a petrol engine ,
  4. Just looked at my post sorry about the fault code I can resend if anyone needs more info
  5. Hi all ,I have been having a issues with the engine cutting out when giving it some beans ( and i dont mean baked!) also sometimes i have noticed the rpm and speedo gauge return to zero and have had a oil pressure warning flash up on the maxi dot display,lift off and all returns to normal apart from speedo,rpm,oil pressure warning ,swicth the car off then on again and its all ok. Its thrown up a fault ........... Address 01: Engine Labels: 06F-907-115-AXX.LBL Control Module Part Number: 1Z0 907 115 D HW: 8P0 907 115 B Component and/or Version: 2.0l R4/4V TFSI 0010 Software Coding: 0203000318070060 Work Shop Code: WSC 73430 790 00000 1 Fault Found: 000801 - Engine Speed Sensor (G28) P0321 - 008 - Implausible Signal - Intermittent - MIL ON Freeze Frame: Fault Status: 10101000 Fault Priority: 2 Fault Frequency: 2 Mileage: 156033 km Time Indication: 0 Date: 2000.00.00 Time: 12:41:10 Freeze Frame: RPM: 4917 /min Load: 0.0 % Speed: 71.0 km/h Temperature: 89.0°C Temperature: 32.0°C Absolute Pres.: 1000.0 mbar Voltage: 13.970 Its pointing towards the engine speed sensor (crank sensor) which I have found out is near the oil filter housing ,Has anyone had this issue ? how easy is it to replace the sensor ? and can you do it without removing the housing ? Thanks for looking.
  6. Guys my VRS has been running like a dream since i changed the PCV, Fuel consumption as gone back up, on the way home not really trying 36MPG on the way into work 39MPG at 70MPH ,no engine light on. Paul remember I told you about my Audi A4 130 TDi ,well the engine light came on and was on for 3 days only just gone off today ,I was wondering if this could be the same issue as my VRS (brimming the tank).? I think it needs a Scan ,do you think you could help me out again? I would be most greatful.
  7. If i remember when servicing my old seat toledo the sump plug was quite hard to get in quite easy to cross thread if you don't know what you are doing ,lets face it these days a lot of young apprentices are doing the hum drum oil services in the stealers,my bet would be the thread is threaded and they just keep on going with it until it was tight ,30Nm isn't that tight,but if you kept on going and tightened it over that it would just go loose.Its all down to Skoda fight it all the way.
  8. I would like to gave a big thanks to GTI jazz Blue for his help today, engine light still remains off,I replaced the PCV today ( for the N version as a matter of course ),couldn't see much wrong with the old one ( it was a F vesion) anywho car is running well. While I was at TPS I bought some oil which turned out to be cheaper than what I get in halfords with my trade card result. Again thanks Paul.
  9. Thanks I am in the process of sorting that now ,hopefully will get the car scanned tomorrow
  10. I replaced that a few months ago ,could this be a PCV fault??
  11. Thanks will this work with the I phone ? also what lead do you need for this to work on your lap top?
  12. Hi all, noticed my engine light on today,the car does seem to run fine although over the last few months i feel like I have lost some boost ,also from time to time i do get a very slight lumpy idle ,I dont have any VCDs (don't know what I need that doesn't cost loads),I have a 2007 VRS petrol 84,000 miles any ideas??
  13. is this the correct part number for my car 06H145710D ?
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.