vinj14

I think something like this should work with your camera. Much cheaper than kufatec option Look what I found on AliExpress http://s.aliexpress.com/aqIZVRJb

A Ah! if you havent ordered yours you should consider the one i purchased. 88USD vs 200 euros.

Thats a normal ccd camera. That wont fit into 26 pin behind the skoda columbus sys. You need a rgb camera with a different wiring kit if you want your columbus to display the reverse camera image.

Nice! I looked for months to find a suitable boot handle one. Where did you get yours? Mind sharing a link?

If you have a columbus reverse cam can be installed easily. And it will integrate with your ops system. I got mine from here. http://www.aliexpress.com/item/Number-Plate-Lamp-holder-Parking-Camera-for-08-09-10-12-Skoda-Octavia-with-RNS315-510/1244599135.html?spm=2114.13010308.0.101.qqTG2Q The dimensions are not exactly the same as the license plate lamps on the car, but use a slightly longer screw at an angle an it will fit in. This is your only option without drilling any holes. Here are some pics on mine. I also converted my regular f/l octy to a vrs one with a bumper upgrade. And the mk3 flatbottom steering installed.

hey thanks for this post. Im trying to fit a vrs bumper with the drls and fogs into my non vrs octy a5 f/l. This wiring diagram will definitely come in handy. Could you post the wiring diagram for the right side DRL too? Im quite sure its similar but would like to know for sure. Thanks

Dont get it.. could you explain like you would do to a novice . anything i can do to correct it?

I purchased an amundsen plus on ebay a while back. Waited for a while before i installed it. Everything works fine but the system keeps reloading in Dutch language every time the car is switched off and on. Ive tried removing the fuse, disconnecting the battery, meddling with vcds settings but nothing has worked. Unfortunately I cannot return the radio (as i am way past the 45 day return policy). Help Please!!! Paid quite a bit for this !!!

Brilliant stuff! Im bit of a DIY novice but you've inspired me. THinking about ordering the rvc kit from the ebay link you sent. Just a couple of questions though I understand from the explanation in the link that the blue wire is to be connected to the reverse lights. But where exactly did you connect the red (12v+) and the black wire (gnd)? Do you think this camera size could fit a 2011 octavia? Would appreciate your help.

Thanks eddie. Helping my friend a retrofit a mfsw for his 2013 octavia (not the new one). His steering wheel control module is 5k0953549. So i ordered the 5k0953549B like you did. Just one doubt though. What part number did you order for the airbag wiring? I ordered 3T0971584. Did i order the right one? Or should i have ordered 5K0971584C? Please let me know. Need this confirmation before i can go ahead with the mod. Thanks

Wow. Great posts on this thread. Now I have the confidence to go for the full vrs bumper upgrade. Unfortunately skodateile had stopped selling the vrs led DRL wiring kit. He would have given me the wiring diagram with the kit too. That's the only thing I need now. Any suggestions as to where I can find the led DRL wiring kit?

Could I add a mfsw in the place of an non mfsw for a 2011 fabia? Would I need a new control module and airbag wiring harness? I'd be satisfied with just buttons on the left as I don't have maxi dot. Advice please

bolero still there?

Still available?

You probably wont post to India right?