Patriot1
Members-
Posts
76 -
Joined
-
Last visited
Profile Information
-
Gender
Male
-
Interests
BRC WRC and club rallying
-
Location
Lake District
Car Info
-
Model
fabia vrs mk1
Patriot1's Achievements
-
Now sold....
-
-
-
Sorry for all the posts I'm not sure how I've done it?, my number is 07531238624 if anybody wants any info cheers..Lee
-
For sale is my fabia Vrs, long story but here goes (no laughing), I changed the oil filter the other week as I had a spare one at home thinking I'd give it an oil and filter change when I had time. Unfortunately the box that had the oil filter in had the lid missing (cardboard), unbeknown to me a flipping side light bulb had got into it at some point that I didn't know about. Anyways to cut a long story short it starved the turbo feed pipe thus knackering my turbo I removed the old turbo and tried to get a new one before I had an operation to plate my collarbone back together, this didn't happen so I ended up having to do it after my operation (2wk after). I've put it all back together but sure as **** it's gone again most probably as I hadn't checked the feed pipe?? I fit a new radiator and egr cooling pipe to it a few weeks back and it's also had the silly matrix pipes that go into the bulkhead replaced with the one piece plastic pipe. The car runs out of MOT tomorrow (4th) It had new discs and pads 2months ago. Reasonable condition with one or two scratches. Rear bumper was replaced and sprayed. Drivers seat has the usual hole in it. Only done 107,000. There is a strange small dent on the n/s sill, no idea how it happened and there's no paint missing around it? I'm looking to sell it as simply don't have the money or health to fix it Looking for £1000 ono Attached Thumbnails
-
Cheers i'll give them a try an see but not holding out much hope, wonder if newer covers will be any better than the original rubbish, like em but not with big holes in them :-(
-
sorry if it's been covered (no pun) before but can you get new fab Vrs seat covers (upright and seat base) from main dealers or anywhere else as finally gonna get rid of the metal on show on my drivers seat :-) They're cloth not leather :-(
-
Fabia vrs rear seat covers + one front seat base
Patriot1 replied to Sam84's topic in Parts For Sale
can you still buy covers as am in need of both driver seat and upright? mine have gone in the usual place -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
Well dare I say it, I think I've done it, picked up the plastic pipe connector today an set about fitting it with the new hose. The plastic part bolted to the heater matrix good an even felt better when going in compared to th $h1te alloy £54 pipes I ended up cutting up for sleeves to connect pipes, got a plumber to make a U out of bends to join the one that goes to the block and fingers an toes crossed it will be good. Goes to show the previous set up was rubbish when they do away with it on the mk2's.. Big thanks to AshVrs cheers for doing yours previously and confirming what I was thinking ;-) -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
Hose is ordered and shipped, might bob into the scrappy today an see if there's an old fabia or polo with one on, otherwise I'll just buy one, wish I could've sorted it before now as gotta drive from the lakes to Hastings in ma dads crv which is mucho thirsty compared to the Vrs :-( -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
Lol good to hear I'm not on my own as literally pulling my fekkin hair out, the alloy pipes are pants an wish Skoda had mentioned this fix but sayin that they have to put em back to factory spec I guess ey? -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
Ahh right, I presume they're easier to seal then?, I've spent too much time desperately praying today with them $h!t alloy pipes £54 from Skoda (not bad compared to what everyone says but still) -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
AshVrs you're a superstar, I've seen that matrix radiator on eBay off a 99-04 fabia an that's how I got the idea, what was it like to get the old one out?, not too bad or an arse.. Cheers for your help, one last thing is does it get affected by heat off the exhaust or is it ok? Cheers -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
Well after another full day trying to seal the matrix pipes I've given up?, has anybody ever removed the heater radiator as I'm wondering about swapping it for one from a different model with fixed pipes that I can fit long hoses onto!, seriously starting to think about bypassing it an trading it in, I loved it until this week :-( -
Heater matrix pipes - nightmare to fit?
Patriot1 replied to cocat2517's topic in Skoda Fabia Mk I (1999-2007)
I just attempted mine tonight as going away in a few days and just saw all my new anti freeze trickle down the road, pi$$ede off I tried sealing again but filled with just water an the same thing happened? gonna try again in the morning when it's daylight an use a mirror to take a better look. Going on holiday at end of week (Lakes to Hastings) so gotta be right. All is accessible from above though so that's a plus as off work recovering from broken collarbone (not fun)