Panosm

Illegal.

Yeap.

https://www.dropbox.com/s/cvae6yaerrh7qsr/Photo%202013-01-24%2019%2007%2014.jpg

I have the black pack as well but with 4 h7 bulbs..

I suppose you opened the hood and checked it? http://carlook.net/data/db_photos/skoda/fabia_rs/2nd_f/skoda_fabia_rs_2nd_f_hatchback5d-945.jpg One in projector and one besides it. This is true If not skoda decided to change the lights for 2013.........

Not true. It depends if you have the FL fabia or not. The facelifted fabia has two bulbs per side. One for full and one for dipped.

Mine did the same. Warranty job. Was told they changed the mounting brackets.

The swing does work with bt. Pretty sure that others who have retrofitted bt did buy a harness that was plug and play along with the module. I would recommend you guys to do the same. Carsystems.pl surely have that kind of harness available.

Mine do not lit up after ignition on and never did. They are on on the second and third (dipped on) step on the light switch.

The mic pins should be attached to the current loom. If you're handy with soldering you could do that yourself, but first google it up which wires you'd have to fiddle with. I got my kit from carsystems.pl that included an "in between" loom for plug and play.

See last post for pictures, http://www.briskoda.net/forums/topic/239259-how-do-you-enable-mfsw-control-for-bluetooth/#entry2985124

No and no. You could hunt down a couple of osram 65w, but those are only for off road use.

I have a Columbus unit in my mk2 vrs and it works without any glitches. Just needs some vcds fiddling and you're good to go.

Think I've seen some of those (replacements) on sale at eBay.

My whiteline rarb did that too. After I dismantled for closer inspection I relubed all the bushes with silicon fat (not sure if the translation is correct). However it didn't stop the squeaking. I've found that the rear door rubber sills made the noises. Add some lubrication on those and you'll be fine.