hi

the 10 mil bolts holding the wastegate in position on my car have come loose, and now i cant seem to get the setting right.

Could anbody tell me if there is a method to setting it up?

if somebody could provide a boost plot that would be helpful since adjusting the wastegate seems to effect boost lower down the rpm range and if i know roughly what boost pressure i should see at 2500 rpm in 3rd gear (currently about 9 psi at full throttle) i can adjust it to that

thanks

jay

This may help Just had a thought - SEAT Cupra.net - the world's largest & most popular SEAT Forum

I think you have the same map i used to have, you should hit around 1.1bar max.