Hi all

well another detail of sorts on my A5 and of course some later pics now with the much awaited quad milltek exhaust. sorry for all the pictures but i got carried away and decided to post them all up.

the car looks pretty well for 3+ years old.

With the addition of the exhaust, the rear bumper and diffuser were changed to S5 parts. diffuser being painted satin black as apposed to the grey. wanted my car to look different from standard A5's and avoid the S5 replica slant as thats not the look im after.

process was

-Rinse with pressure washer

-Snowfoam and detail brush and APC all door jambs etc.

-wheels cleaned and sealed

-Rinse number 2

-wash with 2BM and dodo born to be mild shampoo

-Rinse number 3 and dry with waffle towel

-tardis to remove tar from lower bodywork

-Wash and Rinse number 4

-Clay with Dodo Born slippy and sonax clay

-Cleanse with Autoglym HD clenser----very impressed with this product, great finish.

-2 coats of optiseal

-2 coats of swissvax best of show

-finish with zaino Z8

Here we go, lots of pics as you can see the car had been treated to plenty of drirty roads on the daily commute :thumbsdown:

wheels off to give a good clean and seal

after a good rinse and wash using Billberry and powerwasher.....left plenty of tar....Tardis applied and doing its work

Edited 14 September, 201114 yr by kenny

then iron x applied to remove any remaining deposits

after another good wash and rinse, wheels were treated to 2xcoats of optiseal and 1 of 815

the always included snow foam pictures

Edited 14 September, 201114 yr by kenny

onto the results

engine bay treated to

Edited 14 September, 201114 yr by kenny

More recent pictures now with bumper, diffuser and Milltek exhaust...

Edited 14 September, 201114 yr by kenny

More recent pictures now with bumper, diffuser and Milltek exhaust...

thanks for looking folks, hope your not all asleep :thumbsup:

Edited 14 September, 201114 yr by kenny

Looks great Kenny and it's a very nice motor, as stated on DW the wheels came up a treat.......

PS. Now you know why I always posted links on Brisky to DW as each post you make is limited to a number of pictures............ :S

thanks mate

yeah pic number was a pain

I can't see the pictures....... :(

Nor me

Pics just tell me that bandwidth's been exceeded. Maybe delete a few so we can all see them?

sorry didnt realise i hadnt updated this one

Any videos of the exhaust please

Nice results and an awesome looking car.

looks really well in black!!

Steve

thanks guys, doing video soon

Kenny - just seen this. Top job mate!

As Baker says, those were great results on the wheels. The finished result looks excellent.

Milltek looks spot on too; understated but different

Kenny - just seen this. Top job mate!

As Baker says, those were great results on the wheels. The finished result looks excellent.

Milltek looks spot on too; understated but different

thanks mate, i was surprised you hadnt posted

thanks, it took a while and plenty of products to get there but wheels and car turned out well, without any machine polishing

wheels have stone chips on now but at 3 1/2 years old shes doing ok

thanks, i was involved in getting this exhaust to market with a few others so its good to get it on car and be one of the 1st to have it on the car

LOL, obviously got buried in the Car Care section, as I didn't spot it