Headlights and Brake ducts

[siggik]

Hi guys !

 

i was trying to google two things,

 

1. Trying to find non UK headlights, but having a hard time finding some for a reasonable price, any suggestion ?

 

2. I was trying to see if any one has put induction duct in the front lower ducts on the mk1 vrs bumper, the passenger side is partial open for the intercooler, but the drivers side duct is closed, is ther a aftermarket piece that is open so i can get air in there for the induction kit ?

 

 

any tips are welcome, thanks,..

[YellowCar]

I drilled holes in my corner grill, worked fine. I think it was an 8mm bit makes a nice size hole in the centre of the diamonds. I left some in front of the ambient temp sensor for protection, basically took half of them out. Oh and you'll need to cut out the corner of bumper behind the grill, when you pop it out you'll see what I mean. You can get milotec vented corner grills but drilling is a lot cheaper and easier, looked ok too.

[siggik]

I drilled holes in my corner grill, worked fine. I think it was an 8mm bit makes a nice size hole in the centre of the diamonds. I left some in front of the ambient temp sensor for protection, basically took half of them out. Oh and you'll need to cut out the corner of bumper behind the grill, when you pop it out you'll see what I mean. You can get milotec vented corner grills but drilling is a lot cheaper and easier, looked ok too.

 

allright, thanks, cheap fix like this are fun no need to spend hundreds of $ for some easy upgrades