I can't get my sunshade to fully close. It will fully close then opens about 1/5th. Tried closing with a single press and a continuous press, makes no difference. Battery has not been disconnected. I had left it in the open position for a number weeks before trying to close it. It will fully open.

Car is still within warranty but before going to the dealership I was wondering if  I am missing a trick or if this is a common problem?

 

Edited 26 October, 20205 yr by GreenMachine1.6
spelling

Hello @GreenMachine1.6 did you ever get a fix for this?  My sunshade is doing exactly the same thing.  Cheers.  Mark.

Activating operation of the sunshade
 Read and observe and on page 70 first.
If the operation of sunshade is deactivated (e.g. after disconnecting and connecting the battery), then the operation will have to be activated.
› Turn on the ignition and set the switch to position  » Fig. 65 on page 71.
› Press the button  and hold down.
The sunshade opens and closes again after around 10 seconds.
› Release the button.

 

The above is from the manual, suggest you look it up as my copy and paste is missing the pictures. It is some time since I did this. I think I had to do it a couple of times before it sorted itself. Basically you are cycling the opening and closing while keeping the button pressed.