security access code     PLEES HELP  car not starting after crash

skoda 2019 need Steering Assist (J792)

Address 44: Steering Assist (J792)       Labels:* None
   Part No SW: 2Q1 909 144 M    HW: 2Q1 909 144 F
   Component: TRW_G4L_MQBA0 611 6041  
   Serial number: 01JAA0TZCB2K309
   Coding: 010000000100000001000201010001000000010001
   ASAM Dataset: EV_SteerAssisTRWG4LMQBA0 011016
   ROD: EV_SteerAssisTRWG4LMQBA0.rod
   VCID: 3C2134ED16E8593B6FA-8068

1 Fault Found 
15788544 - Crash Shut-Down Activated 
          P1609 00 [137] - -
          [DEM_FRONT_CRASH_FAULT]
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:

Log-TMBER7NW5L3051482-11698km-7268mi skoda.txt

It might help people more knowledgeable than me if you told us what model and year the car was.

The airbag module will need either replacement & recoding or a reset by a specialist.

2019 SKODA SCALA 1.0 TSI 

6 minutes ago, J.R. said:

The airbag module will need either replacement & recoding or a reset by a specialist.

do they need to be recoded?
older skoda 2015 was not required

My Facelift Yeti is February 2015 and it needed resetting, may not be the same on other models during their production run, answer is that I dont know.

 

The engine would start though and was running in limp mode, you may have another reason why the engine does not start but I am reasonably confident that once you replace the airbags, seatbelt pyrotechnics etc that have deployed you will need the module resetting for the airbag light to extinguish & the system to function again.

Edited 1 January, 20215 yr by J.R.

i think problem is here  
 

does not see the steering wheel position

 Address 44: Steering Assist (J792)  

1 Fault Found 
15788544 - Crash Shut-Down Activated 
          P1609 00 [137] - -
          [DEM_FRONT_CRASH_FAULT]
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
 

but don't let reset this module becouse need security acsses on hex v2

Looking at this thread, VCDS can't clear that code: https://forums.ross-tech.com/index.php?threads/14959/