Hello!

 

I have a Kamiq MY2021 Ambition TDI 1.6 DSG.

 

Car has already Lane Assist from factory. I am trying to activate Adaptive Lane Assist. 

 

So far i have gone through this long coding on Control Unit A5:
 

POINT OF INTERVENTION -> early_setting_via_menu (enable adaptive lane assist)

 

Everything seems good on menu for lane assist, i can find setting to activate/deactivate lane assist(as before long coding) and to activate/deactivate adaptive lane assist (which appeared after long coding).

The problem is that i can't activate adaptive lane assist. It is there on lane assist menu but once i press on it, it's not getting checked.

The only way i found out it can be checked is when i turn on ignition, if i rush to lane assist menu and checked it, is activated for 2-3 secs. Then after these 2-3 secs it is unchecked automatically(deactivated).

You can Find attached my A5 unit info.

I would appreciate your effort to find out what's going on!

Thank you in advance!


Greetings,

Nikos

 

Hi Nikos1,

 

Is that a screenshot from OBDEleven?

 

Thanks

Regards,

30 minutes ago, Volvic said:

Hi Nikos1,

 

Is that a screenshot from OBDEleven?

 

Thanks

Regards,

Yes, its obd11 on android.

Thanks Nikos.

 

I thought the Kamiq MY21 has the SFD protection. You can use OBDEleven to read data, not to write them. Am I correct?

 

 

On 24/04/2021 at 18:18, Volvic said:

Thanks Nikos.

 

I thought the Kamiq MY21 has the SFD protection. You can use OBDEleven to read data, not to write them. Am I correct?

 

 

I don't know if has the SFD protection, but i a m sure that i have done some longcoding in A5 unit.

***Finally i have found the solution!!!***

After an update from my dealer on A5(camera) unit from Software version 1030 to 1302(software number 2Q0980653C) and on 5f(multimidia) unit to 1760(software number 654035869D) , adaptive lane assist works perfect!

Point of intervation set to ''early setting via menu'' on A5 unit.

EnJoy!