Hi. Please can anyone.  Driving me crackers. The garage need a build code and or steering wheel module code for 2018 octy with cruise control (not ACC)) so they can reset . The picture below is what is showing on their reader. It may have been set historically for ACC when it does mot have it. Trying to avoid Skoda charging me £££ for  code as I'm skint at the mo. Any help would be greatly appreciated. 😊

 

I think we're gonna need a little more info...

 

There isn't a one code fits all cars I'm afraid. Lets start with:

- What happened to the car

- Has something been changed/replaced

- If so, what are the old/new part numbers

- Were you able to read the old coding out

- Do you have a MFSW

- Manual or DSG gearbox

Thanks, wasn't sure what to put! It's DSG has Mfsw but no assistance menus like lane assist. 

The garage I use are good but haven't got vcds to produce the code. Apparently they need the code to programme the module? 

Nothing has been changed or replaced . No coding was.available so build code needed to reset CC.

Thank you 

If nothing has been changed or replaced, the module shouldn't need recoding...

 

I don't think it's possible to 'reset' the CC either. If there are fault codes, they can be cleared but if they come back then you'll need to find out why.

 

Still, if you really want to try changing the coding, I'd probably try (at your own risk):

- byte 00: 14 (currently 6E)

- byte 01: 10 (no change)

 

No idea what different that will make or if it's actually correct for your car. If you get odd behaviour set it back to 6E and get the car on VCDS to get a better idea what's happening and what modules are installed.

Thanks for the suggestions.  I may have to bite the bullet and begrudgingly go to Skoda.  Thanks again for your help.  Will post the results when known

Car back from Skoda.  Cruise control codes were wiped prior to my ownership! Skoda managed to restore so all good. 

Thanks for all advice and help.