My 'Amundson' display has suddenly decided to stop working (i.e. radio/satnav/etc/everything). This has always come on when the ignition is ON. Is it possible that I may have inadvertently operated a switch somewhere that I'm not aware of?

Anyone out there have any ideas?

Where might I find the fuse for this, if that seems most likely?

Very grateful for any help/advice!

(The minor display behind the steering wheel works OK).

I don't know if this is applicable to your car (too hot for brain to work 100%)

 

https://www.briskoda.net/forums/topic/477657-amundsen-mib2-firmware-update/?do=findComment&comment=5676531

 

Screen Amundson 2017 can go blank (customer complaint)

This is in the wrong group to start with if it relates to an Octavia, the title should also display something more specific than the car make and model regarding the actual issue so people who are more knowledgable on the mib systems can chime in and assist.

 

but regarding your fault I wouldn’t be jumping to check fuses - first of all, have you tried simply pressing the power button to see if you’ve just turned it off? If it doesn’t work, hold it for 10 seconds and try again.

 

after that I’d be looking at scanning for any fault codes before touching fuses - if you pull fuses first you risk removing any fault codes that could assist you further down the line if it’s a repeating fault or a hard one to diagnose