Skip to content

Front wheel area, and ABS cable routing (picture needed)

Featured Replies

Can someone post a pic from under under the front wheel arch on a ABS model.

Trying to work out if the ABS cable at this point needs to clip onto something. Maybe I'm missing a bracket, or it's possible that it's like that because it's just a generic ABS sensor.

IMG_20250821_213645.jpg

I assume the photo just shows a trial fit as the grommeted sleeve isn't fitted into the circular bracket on the damper. If the steering turns fully both ways without touching the lead I think same as you that the second grommeted sleeve isn't needed. It might be a photo but the second grommeted sleeve appears (to me anyway) to have a smaller grommet part so perhaps is to make the generic sensor fit a range of cars with different size circular bracket(s?).

I don't know with the ABS but other sensor can be very particular about having the exact correct sensor - IIRC I saw a Merc owner had fitted generic ABS sensor to an older model and it worked fine.

Obviously current Felicia owners will know better or for sure.

Edited by nta16

  • Author

Spent ages findIng this, I seem to be missing a bracket, part 10 in diagram.

Looks like it's held/clamped in place by the strut pinch bolt.

No chance of finding one of these, so looks like I'll be having to manufacture one.

image.png

  • Author

Here's the new abs cable bracket I've made up.

IMG20250824135559.jpg

Fitted

IMG20250824160901.jpg

With cable routed

IMG20250824162905.jpg

I made one for the other side, but it seems that I forgot to take a pic.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.