djduese

https://onedrive.live.com/View.aspx?resid=3AE6945C79E4C9E!17729&wd=target(5E - Octavia 3 FL.one|326dfe26-71ca-45e5-81c0-c94d626da7ad/Octavia 3 FL|a87ea3bd-9978-4578-b9e0-13dbee35f07e/)&wdo=2&authkey=!AMn8y885S2R-6Xg Information: it is forbidden to make screenshots from it (copyright) You can use the search function in vcds. The channels have the same name. Only the directories are different. For example it is not Zugangskontrolle, now it is in ZV-Heck or something like that.

Sure but i have it only in german. But not in text. Only as pics, so not to use with translator

No. The order of channels is different. Also model year 2017 has no coding in controller 09. All bytes are 00

It is depended of model year. In germany from model year 2017 the adaptation is sorted different to model year 2016

I have another scan from a Superb I coded. It has the part number 3V0 920 750. Performance Monitor can not be activated per coding

I only talk about mk3, not mk2. In Germany, there are other cluster installed. For example : 3V0 920 710 A I have activated it on several Superb mk3 and had never the message of "out of range". I think the UK cluster are completely different

I have a Octavia but I have activated lap timer several times at different cars. Superb is also MQB. Sport Information (Performance Monitor) is a completely other function than the lap timer. Sport information is at Octavia and Superb only with sportsline/RS. Lap timer is always in cluster. No matter if Octavia or Superb.

Laptimer is only in tacho

Controller 17 Byte 1 Bit 3 Without any login

That's wrong. Lap timer only needs a coloured multi function display and has nothing to do with performance monitor. Lap timer is shown in multi function display as a separate menu

If you want to open sunroof completely by comfort open you have to set SAD Richtung Komfortoeffnen to open and in controller CA "Ziellage bei Komfortöffnen" to "Schiebelage"

Sunroof is in 09. Adaptation "Schiebedach" "SAD Komfort oeffnen" and "SAD Komfort schliessen" both has to be changed to active

In 5F you have enabled the adaptations with Lane Assistant. These are the options for Blind Spot. Because of that you have to deactivate them again and have to enable the adaptations with Lane Departure Warning. Lane Departure Warning in 5F shows you the Buttons for Lane Assist

You have enabled the wrong or too many adaptations in 5F. Fault in 44 comes at coding. This fault could get erased easily by deleted fault Codes. In 5F could be because of wrong adaptations in 5F. Perhaps you have enabled lane-assistant instead of lane-departure-warning?

To retrofit the camera you also have to change windscreen