Flo

Just the plastic part under the fog lights. Use your mobile phone to take photos if you want to see what's inside

Yes, that's true A friend of mine has VCDS and I haven't to pay for it.

Could be true and only expensive led bulbs work fine but, after coding with VCDS, I fitted these for 3,5€ and no problem: http://www.ebay.es/itm/261072566667

Awesome work. I read that if you have Front Assistant radar this should be recalibrated when the bumper is removed. Does anyone know if it is true?

Thank you! :clap:

Working for me too

Corneringt: http://www.ledperf.co.uk/pack-of-2-bulbs-h16-19w-cubit-5000k-diamond-white-p-4973.html Fog: http://www.ebay.es/itm/370921230970

Spanish vehicles does :( Can be due to a different configuration depending on the country

When the w5w bulb in rear plate is replaced with a led bulb (even if it's canbus error free) an error is displayed in the Infotainment. It's possible to use VCDS for using led bulbs: -> Controller 09 - Central Electronics -> 16 - Security Access - enter 31347 -> 10 - Adaptations Change the 2 channels listed below (1)-Leuchte25KZL HA59-Lasttyp 25 - set to: 43 - allgemeine LED (6) Leuchte25KZL HA59 - Dimmwert AB 25 - set to 127 Here you can see the difference between Led (left) and halogen Philips Blue Vision (right):

Done! Be careful when removing the plastic because you can break the seal (I broke the first one). Use a thin piece of metal for easy removal.

IMO the better is to start a new one and add the link here for reference.

Thank you xpower!! :clap: :clap:

Maybe it works if you follow the non-vRS configuration: http://www.briskoda.net/forums/topic/299424-octavia-iii-vcds-adaptations-tried-and-tested/

Spanish version uses only the exterior bulb for cornering and when you turn on the fog lights four lamps are lit. Maybe it could be changed with vag-com.

I'll use halogen bulbs. Blue effect (5000ºK) for cornering and Yellow (2500ºK) for the others.

any progress with this issue? I want to change bulbs too

Thank you ahaavi, excellent image! I guess it's for security reasons. I'll try to remove it this week.

Hi all, Has anyone changed front fog bulbs? I could access the bulbs by removing the plastic under the fog light but there is a plastic part that I do not know how to remove. I recorded a *poor* video with my phone. http://es.tinypic.com/r/23ljnzb/8 Any help is appreciated

Hi all, This week I get my new RS. I've read a lot of interesting posts on this forum so I decided to register