Jump to content

E1Skoda

Members
  • Posts

    55
  • Joined

  • Last visited

Posts posted by E1Skoda

  1. About what rpm on 3 gear its starts spinning? :) till I not changed shells, piston rings and head gasket I don't do remap( my skoda have 160k miles:) so I don't want risk to ****** engine:) I got it very cheap( so I can rebuild engine) but first I want find out or it's must be so limpi till 2000 or no:)

     

    I don't really remember, I just know the pedal was on the medal :D

     

    Don't worry about the engine breaking or anything for the remap, the remap only helps for better. The only thing that could break after a remap, is if you have a heavy foot on the gas haha :p

     

    EDIT : I have rougly 150k KM on my car :P

  2. Ehm,

     

    Not 100% correct, but isn't it at 2000RPM when the turbo activates, so you actually generate more power than a mowlawner?

     

    I remapped my Skoda Superb II 140 PD, gained about 50-55HP, It's at 190-195hp right now. It's WAY quicker than it used to be, and it doesn't have the "low power" feeling at low RPM's anymore due to the turbo activating quicker now.

     

     

    I suggest a remap for anyone with any kind of a car, they really make the driving more enjoyable. and quicker :)

  3. I'm sure the 'hiss' is normal, and would be surprised if any replacement shocks don't hiss also.

     

    The "hiss" isn't normal, it's your suspension wearing out I'm pretty sure..

     

    I replaced my dampers with Bilstein B4's, the quality is 100x better, the car is so smooth and no noises when going over bumps or anything.

  4. Hey fellow Skodians!

     

    I am going to do some exterior modifications to my car, and I wanted to ask about the diffusor and exhaust system.

     

    My Superb currently looks like this https://gyazo.com/64d32e0e0408628684e0dd9b27b2a9fb

     

    I want it to make it look like this https://gyazo.com/f10ad2d4bbdc84c4a08d01f6baf7bf77

     

    Everything else should be easy, but is there any way I can fit that kind of an exhaust like the Skoda Octavia MK3 VRS has? It would just look amazing.

    I want it to look like the BMW M550d exhausts or something like it. Also if I plastidip my diffusor, will I have any problems with the rear sensors?

  5. Got a Celtic-Tuning remap from a dealership here in Finland.

     

    140>196hp, I must say there's a VERY HUGE difference. The wheels started spinning on the 3rd gear full throttle.. The car is pretty much insane now, even won a BMW 520d F10 :)

     

    I fully suggest remapping to everyone, as the MPG is better, throttle response is way better, the torque feels a lot smoother and of course it's a lot faster. I've noticed that with the 1st gear I can go upto 60km/h while before I could only go 40km/h. 

     

    The engine is a lot quieter also at idle and while driving also.

  6. Hey,

     

    I've been scrolling through the german ebay to look for some new brake discs + pads. I found some ideal ones, but in the car list it says it's only for the Mk1 superb, does the Mk2 superb fit mk1 ones also?

     

    I asked my local Skoda dealer, and they said that my car has these exact 312mm (front), 282mm (rear) brake discs.

     

     

    Here's also the link http://www.ebay.de/itm/Zimmermann-Sport-Bremsscheiben-Belage-312mm-VA-282mm-HA-Audi-A3-TT-Octavia-VW-/150844757057?pt=LH_DefaultDomain_77&hash=item231f0c5441

  7. Recently when my brother (who got his license a month ago) drives, when he is at a stoplight and releases the clutch a little so the car won't go down when it's a bit steep, and puts into the 1st gear and gives gas (as usual to get the car moving :P) the gear sometimes pops out for no reason. This never happened when my brother first got the license, only after a couple of weeks. Did he screw up the transmission or what could be the possible problem here?

  8. I needed to change my plans, because my supplier was not able to deliver my wheels.

    So my question is that will they fit?

    Front 8.5x19 et35

    Rear 9.5x19 et45

     

    I think the 8.5x19 ET35 will slightly come out in the front, I have 8.5x18 ET45 all around, and they fit really nicely, flush with the arch in the front.

     

    I could add about 10-15mm spacers to the back, but I can't be bothered with it since it already looks very nice.

    • Like 1
  9. Sorry for the late reply, gave up a bit on this post haha :P

     

    Anyways, I ordered some nice rims, 8J ET35 with 225/40r18 Vredestein Ultrac Cento tyres. Must pick them up tomorrow :)

     

    I'll post pics when I have them fitted!

    • Like 1
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.