[estate golf clubs]

I have the Estate and I have to remove the driver from the set to make it fit without folding the seats down.  I can fit the set across the boot if I open up one of the side bins.

[Airbag error and steering wheel controls out]

My 2013 Superb just threw an airbag error and the buttons on the steering wheel and the horn have stopped working.  Wipers, indicators and cruise control are working normally.  I have plugged it into my VCDS and the following errors came up:

 

-------------------------------------------------------------------------------

Address 15: Airbags        Labels: 5N0-959-655.lbl

   Part No SW: 3T0 959 655 D    HW: 3T0 959 655 D

   Component: J234__LD5 VW10 HI   2118  

   Revision: 24019000    Serial number: 003LEP518A34  

   Coding: 0017461

   Shop #: WSC 33361 790 00064

   VCID: C281600A9D734031B84-8097

 

   Subsystem 1 - Serial number: 6332MTS639520643 

 

   Subsystem 2 - Serial number: 6342MTS639650643 

 

   Subsystem 3 - Serial number: 6351HTS62PN0RBKJ 

 

   Subsystem 4 - Serial number: 6361HTS6PBP0RBKR 

 

   Subsystem 5 - Serial number: 63727TS6FGD4RBKR 

 

   Subsystem 6 - Serial number: 00000000000000000

 

1 Fault Found:

00588 - Airbag Igniter; Driver Side (N95) 

            001 - Upper Limit Exceeded - MIL ON

             Freeze Frame:

                    Fault Status: 11100001

                    Fault Priority: 2

                    Fault Frequency: 1

                    Reset counter: 255

                    Mileage: 43257 km

                    Time Indication: 0

                    Date: 2015.04.29

                    Time: 17:44:12

 

 

-------------------------------------------------------------------------------

Address 16: Steering wheel (J527)       Labels: 5K0-953-569.clb

   Part No SW: 5K0 953 521 AT    HW: 5K0 953 569 B

   Component: LENKS.MODUL   016 0140  

   Revision: FF010041    Serial number: 20130319800687

   Coding: 1882140000

   Shop #: WSC 33361 790 00999

   ASAM Dataset: EV_SMLSNGVOLWSXS A01004

   ROD: EV_SMLSNGVOLWS.rod

   VCID: FEF9D4FA610BE4D19CC-80AB

 

1 Fault Found:

365080 - Controls in Steering Wheel 

          U108E 00 [009] - No Communications

          Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 6

                    Fault Frequency: 1

                    Reset counter: 90

                    Mileage: 44012 km

                    Date: 2015.05.14

                    Time: 13:01:00

 

 

-------------------------------------------------------------------------------

 

I have tried clearing them but they pop up again immediately.  I'm thinking it's the clock spring or a break in the wiring?

Any and all thoughts welcomed.

 

Biggi

 

[PLEASE HELP! LONG CODING FOR BRAKE CONTROL MODULE LOST]

Have you tried talking to these guys? http://www.ecutesting.com/catalogue/skoda_eculist.html?category=4047&model=532

They fixed the ABS pump in my Touareg, very fast service and a great price

[Bolero Radio and Surround Trim]

Do you still have the Bolero?

[Front turn signal stays on]

I have the 35W kit from London colour, http://www.ebay.com/...=STRK:MEBIDX:IT

[Front turn signal stays on]

I have the 1K0 937 087 AE module, it has been replaced with a new one.  The question remains, should I try the HID´s again and risk frying the BCM?

[Front turn signal stays on]

I only changed bit 4 in byte 14 from 0 to 1.  I did not change anything else and kept my light switch set to Auto

[Front turn signal stays on]

That's what I thought.  The question remains - what is the correct coding?

[Front turn signal stays on]

This is the one I bought:  http://www.ebay.com/itm/330379335700?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

It's a non-canbus kit and it's a 35w hot start bulb.

[Front turn signal stays on]

I'll try to get it fixed under warranty, have already removed the HIDs, but I really like them and would like to reinstall if I can be sure that they won't blow the BCM module again

[Front turn signal stays on]

I have no intention of trying to fix the module, no skills ;-)  Just wondering what caused the failure in the first place, so that I can prevent it from happening again if I reinstall the HIDs

[Front turn signal stays on]

Thanks for the quick replies guys.  Any ideas what went wrong and how to fix it?  I changed the coding in Central Electric 09, byte 14 bit 4 from 0 to 1, but didn't change anything else.  Should I have changed bit 3 as well?  What about using the "Auto" setting on the light switch, would that cause this fault?

Any ideas on where to get a replacement module and how hard is it to replace?

 

Biggi

[Front turn signal stays on]

I have a 2013 pre-FL Superb estate and tonight when I got home the left front turn signal stayed lit after I turned off the lights.  I had to remove the bulb so that the battery would not run down overnight.  I installed a HID kit from Londoncolour, non-canbus, last week and coded it via VCDS according to instructions here on the forum and it is working perfectly, no errors.  I mounted the ballasts inside the lights but I can´t see that they have damaged the wires or connections to the turn signal bulb.  Anyone have any ideas what is going on with the lights and if the HID kit could be causing this?

 

Thanks in advance

Biggi in Iceland