pben123

thanks thats the info i was after

hi the gearbox in the 75hp has a longer ratio 4.55 compared to 4.11 on th 60hp car jam after the code for the gearbox for the 70hp as

hi all looking the gearbox model number that is in the 75hp model citigo or vw up it has a different ratio and i need it for the rally car Iam building any help would be great

Painted Black

primed raedy for paint

floor cleaned the worst job ever

Rear quater fixed ready for paint

floor nearly finished going for a light media blast to clean the any residue off.

trial fitted adjustable top mounts and olhins suspension . the car will have reiger fitted when finished .

its costs 1200 to get the shell soda blasted budget wasn't there for it our target weight is 950kg with driver and co-driver hope to have it finished by end of october at the latest

front section rubbed down and etch primed now for the seam sealer still more undersea to remove its unbelievable how much there is on the car

underseal on front arches removed this is the worst job really slow with a heat gun and scrapper and wire brush on the drill and angle grinder.

rear part of cage rubbed down and etch coat sprayed on

engine set back in

engine by a rubbed down and painted last night. Lots of underseal to remove .

best cage I have seen done great tidy welding all T45 TOTAL WIEGHT 45KG get it painted over the next two weeks and start building

Hi roll cage finished excellent job by wishart engineering t45 full international spec cage with axel stand points strengthened suspension points steering column support seat rails . Next job prep for paint and removing underseal from the arches and the floor heat gun and scrapper not looking forward to this .

some panles plastidipped gun metal grey matt badges done in metallic gunmetal grey.

they have electronic distributors fitted from aldon and ater doesn't effect them

yes yes we have three old minis green one is a 998cc the brown one is a 1480cc straight cut gearbox screamer and the blue one has a 1090cc shark ossicle engine

starting to strip boot lid and doors removing wing mirrors excess wiring and weight and prepare for painting and going to make carbon door cards for doors and mount elec window switch on new switch panel between seats .

was up with the guy who is fitting the cage tonight get my seat position and position for the steering column he will have the cage finished by end of next week progress at last. main hoop front hoop in all the holes filled looking good still has door bars dash bar rear cross bars and front window gussets and front tie bar and link to front strut tops all the bars are cut and ready to fit Geiger adjustable top mounts to fit

workshop on the dinning room table needed room to keep the wiring loom all together when i untaped it .

been awhile the guy doing the cage broke his arm going up on wed to get seat position and steering wheel position sorted will have some photos started stripping the wiring loom 5.1kg out of it already .

hi all car is still at the roll cage guy been busy preparing loom will add some photos next week . we are racing at knock hill mccrea rally this weekend in c1 so been bust prep car for that