-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by saragerges
-
-
Iam sorry Ricardo,my engine is 135 not 135mpi....what about it???
-
Is it wrong to use gasoline octan 80 in felicia 97 carb engine 135mpi
Thanks
-
What do you mean by "closed by tin" ?
Do you mean that somebody used tin to plug the holes of the enrichment circuit? If yes, that is something new to me.
There is an easier method to disable the enrichment circuit (see photo). You simply install the gasket rotated by 180 degrees.
Referring to the effects of disabling the enrichment circuit, the car will have slower acceleration but the fuel consumption will be lower.
Thank you....you really understand what i mean and it's satisfactory answer.
-
Hello
I found all throttle enrichment valv is closed by tin.
Shall i open it or let as it is?
Thanks
-
The fuel consumption may be slightly higher.
Thank you.
-
There is a potential problem. The carburettor, which sits on top of the intake manifold, will become too hot. The fuel may start to vaporize and form a vapor-lock. The engine may stall when driving in traffic. Moreover, hot engine start may be very difficult.
Is it causes increase fuel consumption ?
-
Hello
Is there any problem when cancel cooling system input to the manifold (iam in hot claimte)
felicia 97 carburater
Thanks
-
Hello all
I need your advice to choose right oil
fully synthetic,semi synthetic,mineral or high mileage?
felicia 1997 engine 1.3 mpi 147000 km.
notes: drive in high traffic.
-
1) The smallest diameter you can use is 0.800 mm. There is no danger for the engine but the car will have slow acceleration.
2) Air jet = 1.30 mm. Fuel jet = 0.45 mm.
3) There are two type of gaskets:
- old type made of steel covered with rubber (see photo 1)
- new type - sandwich type - a steel plate, a bakelite spacer, and 3 cardboard gaskets (see photo 2)
Thanks for your Support
-
Hello
1-I change main jet - primary size 92.5 to size 87 to decreasing fuel consumption(is this action wrong or Danger on engine?
2-what is size of idle jet - primary?
3-how many gasket between carburateor and it's base on engine
felicia 97
Thanks
-
See this topic.
.Thanks a lot but i wanna know can i install almonium cap on the fiber part (to be sure only that i understand perfect)
-
can you tell me what is the compability thermostat to felicia with others like vw ,seat ,octavia , korean cars ,japanees cars.
Thanks
-
Thank you,this picture is very useful
-
Please,how can i measure gearbox oil (felicia1997 carbourater)
- 1
-
Thank you Ricardo
what about run my felicia without thermostat to avoid bad chinese auto parts in this important part(thermostat)
-
Hello
please,i want to know 1- what is better radiator copper or aluminum for hot claimate?
2-how can i get thermostat 80c because in Egypt i found 88c only(very bad chinese auto parts )
my car now without thermostat.
felicia 97 1300 cc
THANKS
gasoline
in Skoda Favorit, Skoda Felicia, Skoda Fun and Skoda Forman
Posted
I thought there is different between 135 and 135 mpi .
Many thanks for your advice.