Jump to content

deanhempshall

Members
  • Posts

    29
  • Joined

  • Last visited

Posts posted by deanhempshall

  1. Sorry for the late reply guys.

     

    I used chemical guys blacklight on a Megs finishing pad. Going to start a full 1 stage correction with scholl S20 black soon though.

     

    I'd like to do the wheels anthracite at some point but as it's a lease car it's a grey area at the moment.

  2. 2 minutes ago, tigermad said:

    Looks fantastic. So what product removed the swirls? Black light or have you polished it with a rotary?

    I applied blacklight with a da so did one coat as i would for swirl removal then a 2nd coat as directed. There are still some swirls in it but until i have more time to do a full correction they will have to remain.

    • Like 1
  3. 2 minutes ago, tigermad said:

     

    I decided not to clay mine. Used korrosol and bilt hamber cleansing fluid and it was a smooth as silk ready for the lsp (double speed wax)

    I went ahead and clayed mine, although it is going to need some more correction than just applying blacklight and wax.

     

    Well it's rather swirly, ive not done any full correction just yet as I've not had the time.

    Only managed to get the drivers side done before it got too warm.

    Clayed: Slim's fine clay & dodo clay lube
    Sealed: 2 coats of chemical guys blacklight by DA
    Wax: ODK SiNuba

    B Pillars Before:
    IMG_20170402_125250.jpg

    Drivers door before:
    IMG_20170402_121812.jpg

    B pillar after:
    IMG_20170402_130338.jpg

    Drivers door after:
    IMG_20170402_124800.jpg

    Drivers side After:
    IMG_20170402_143654.jpg

    • Like 4
  4. Well it's rather swirly, ive not done any full correction just yet as I've not had the time.

    Only managed to get the drivers side done before it got too warm.

    Clayed: Slim's fine clay & dodo clay lube
    Sealed: 2 coats of chemical guys blacklight by DA
    Wax: ODK SiNuba

    B Pillars Before:
    IMG_20170402_125250.jpg

    Drivers door before:
    IMG_20170402_121812.jpg

    B pillar after:
    IMG_20170402_130338.jpg

    Drivers door after:
    IMG_20170402_124800.jpg

    Drivers side After:
    IMG_20170402_143654.jpg

    • Like 3
  5. Took delivery of my new Skoda Superb Hatchback this morning....Typically the weather is shocking.

    Specification:
    SE Technology
    Pacific Blue
    Leather & alacantara interior
    18" modus alloys
    Bi-xenon headlights

    IMG_20170401_111929.jpg
    IMG_20170401_115333.jpg

    Pre-wash: Serious Performance Citrus
    IMG_20170401_172339.jpg

    Wash: Bilt Hamber Auto Wash by 2bm
    Dried: Sonus waffle weave towel

    All door shuts wiped down etc...

    IMG_20170401_180257.jpg
    IMG_20170401_175842.jpg
    IMG_20170401_175831.jpg
    IMG_20170401_180121.jpg
    Getting some stuff together to make a start in a little while. Kids going to the park is apparently a higher priority than the car :confused:

    IMG_20170402_080825.jpg


     

  6. 2 hours ago, Speedman said:

    Hi, do you think it is necessary or will make any difference claying a new car? Only ask because I decided not to do mine.

    It completely depends upon what you're doing after it. For me i asked the dealer not to prep the car as i wanted to apply my own coatings etc.... They appear to have listened however it still seems to have transit wax of some sort on it. 

    The only way to really strip it back to basics is by claying.

     

    I'm planning to clay then apply 2 coats of chemical guys blacklight then top it off with 1 coat of ODK SiNuba wax.

  7. 2 minutes ago, tigermad said:

    My car also arrived this morning. Not the best pic but after 3 hours detailing it the sun decided not to come out for my photo. It's a L&K 2.0 tdi 150 dsg in Quartz Grey. Only driven it 12 miles so far so need to give it a good run to really appreciate it. 

    IMG_0377.JPG

    Looks great. Not even driven mine yet :( i need a full day of good weather so i can get cracking at making it shiny!

    • Like 1
  8. On 29/03/2017 at 16:50, deanhempshall said:

    Mine arrives on Saturday.

     

    Superb SE Technology 150 TDI 6sp manual

    Pacific blue

    Leather & alacantara

    Bi-xenon headlights

    Heated front seats

    18" modus wheels

     

    Taking delivery Saturday AM and I'm hoping that the lease company passed on my request for the dealer to not prep it.

    Well here she is....Fresh with 17mi.

    IMG_20170401_111929.jpg

    • Like 3
  9. Once the lacquer gets a break in it the diamond cut wheels start to oxidize and turn white under the lacquer.

    Anything like a strong tfr or APC cleaner can cause this too. Ive seen hand car washes ruin diamond cut rims due to using a high concentration tfr or APC (essentially acid) which has eaten away at the lacquer/got under via a break in it.

     

    I've ordered modus wheels on my service tech which is due in 3 weeks.

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.