Booshakker

Just out of curiosity, did you find the problem? I've stripped the linings out in my hatch as it was leaking from the same point, all of the jets are functioning adequately but get loads of water near the boot close button. There's no sign of a split pipe or water coming from anywhere else than the rear camera washer. I'm flummoxed! Has anyone else had this before? Failing that, does anyone have any instructions for removing the camera and opener module? Thanks 👍

I really do think that it's the phone and not the car. The phone does other daft stuff like continuing to ring when you attempt to answer it (when nowhere near the car), but stupidly you have to unlock it first before answering the call. A real PIA. The comments made about the dash cam are my observations, but if you want to go down the route of AliExpress, you must do what you feel is correct with the information gleaned. Cheers

Doesn't appear to do. Though saying that, I've just got a Pixel 5 and Android Auto is behaving a bit erratically (seems to freeze now and again and have to unplug the phone). Other than that, no other issues!

I've got a Nextbase 522 with rear camera. I installed the rear camera myself but got Halfords to do the main unit which is hard wired to the fusebox. It cost me £35 for the fitting, including the kit and 30 mins of my time. It's a really neat job and I'm v.happy with the result. If I'd have not done the rear camera already, I think they wanted another 15 quid to do that. Well worth it in my opinion!

Glad it worked. At least you didn't need to remove the boot lid liner like I did 🤦

I had the same problem last week and it really pi$$ed me off. After reading one post about removing the boot lid liner to check for a split pipe - which I foolishly did and there wasn't, the simplest was to pop the jet nozzle off using a flat screwdriver (it's a click fitting) then try the washer jet. If you get a vertical jet of water then you know the jets are blocked. I used a bit of wire wool to remove any rust deposits and it now works as it should do. It might not be the same issue as mine, but worth a try 👍👍