Jump to content

ElliottLW

Members
  • Posts

    60
  • Joined

  • Last visited

Everything posted by ElliottLW

  1. I think you have to be careful about what you buy, mine doesnt drone at all
  2. I just put a res delete on my 245 and its been brilliant for the 25k miles I've ran it
  3. If you know someone with VCDS or ODBEleven they should be able to code it in easily for you
  4. Can absolutly be adjusted, drove me nuts until i found out!
  5. Nice spec, but as others have said its a 245 exiting before the refresh
  6. It should be pull towards you for +1 and push up/down for +5/-5
  7. What settings did you use as most on the Areca forum have found that it’s random what car contain the module even without memory seats
  8. Hi all, mirror dip only works if your car has the seat memory module fitted
  9. Just for security I would recommend removing your VIN number from the provided ODBEleven export
  10. I've never used credits on mine... Rear DRL's High Beam Assist Traffic sign recognition Diff set to "strong" SS disabled A load more smaller tweaks
  11. This is what I used to code on my VRS245 (18') Procedure: Ensure light switch is off Conduct a soft reset when accepting each change Reset Light menu to factory settings after coding to display new menu option Controller 09 - Central Electrics Security Access - 16: 31347 Adaptations - 10 - Search for Fernlicht to narrow down the options - Menusteuerung Fernlichtassistent Werkeinstellung: Set to PRESENT - Menusteuerung Fernlichtassistent: Set to PRESENT - Erwiterte Fernlichtsteuerung: Set to AFS: FLA: FERNLICHT UEBER AFS Menu option for "Light Assist" should be available in the Lights section of the Car settings menu (may require a factory reset of Light menu). If you want HBA to remain active, with light switch in Auto, then code the following - Fernlichtassistent Reset: Set to NOT ACTIVE Controller A5 - Front Sensor Coding (using experimental coding values) -Byte 19, Bit 0-3 (00 FLA_Additional_High_Beam,no_Additional_High_Beam -Byte 19, Bit 4-7 (20 FLA_Headinglight_Type,LED) -Byte 21, Bit 5-7 (20 AFS_coding_Light_Assist,High_Beam_Assist) Controller 4B - Multifunction Module Coding (using experimental coding values) -Byte 11, Bit 6 (High Beam Assistance,Enabled) You may get an error pop up regarding Headlight Range Control. To clear this, go to Controller 4B, Basic Settings. -Basic Headlamp setting -> Go -Acknowledge basic setting -> Go
  12. Should in theory be able to map to ~300bhp too
  13. I'm not so sure, the units can be purchased for ~£600 which doesnt seem to bad
  14. Has anyone tried to retro fit and been successfully with new LED units?
  15. Isnt there an issue with caliper clearance though? My vrs245 has 345mm discs and they would struggle to fit behind a regular spare wheel.
  16. Yea just knock off ebay, it’s ran by alibaba iirc Oh god that doesn’t sound too good.... hopefully mine aren’t the same but if they are I’ll flat them back and respray, just don’t want to spray my OEM ones
  17. Friendly heads up that they appear to have resurfaced on Aliexpress: https://www.aliexpress.com/item/New-Car-Styling-ABS-Gloss-Matt-Black-80mm-90mm-Front-Hood-Trunk-Rear-Boot-Badge-Emblem/32917202148.html?spm=a2g0s.9042311.0.0.3da24c4d3AmzCl
  18. Those wheels are lush, are they flipped for the other side or the same stamped wheel pattern?
  19. I'd just replace fluid with 5.1, rebleed and try out providing that the discs and pads are still thick enough and havent been too hardened
  20. Yea directional so C is open towards the back on both sides as it passes through the caliper
  21. No noticeable noise nothing like slotted ones I’ve had in the past. It wouldn’t do for everyone to have the same taste
  22. Well, fitted them yesterday will take a while to scrub in before i can say for sure but they definitely have a lot of initial bite
  23. Then yes, it shares the same platform as the Octavia and Ateca I've no idea Im afraid, i haven't tried, although i wouldn't recommend relying on your satnav data as its wrong quite often
  24. I've activated on my Octavia but it does require the full A5 camera package, do you have lane guidance?
  25. So far I've completed the below using ODBeleven Pro on our Karoq and a load more on the Octavia vrs: Needle Sweep Rear LED cluster on with DRL Auto - Fan speed Increased air conditioning "power" Mirror dip Off Road mode
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.