Naiko

Hello friends, I need the tightening torques for the oil pump for 1.6 and 2.0 TDI from 2017 to the block and belt pulley, the central bolt of the crankshaft, the plate with the camshafts to the head and for the timing drive. I searched but did not find the exact tightening torques.

I use a translator and I'm having a hard time finding anything, I would be happy if you could provide a link to the topic.

Hello, I see that the topic is old, but very interesting, I have a problem with LED bulbs h7 on reflector headlights that I purchased from an online store, when I press the accelerator pedal, the light increases and when I release it, the light decreases, I have no indications of a burnt out bulb, does anyone know how to code low and high beams on LED? The car is an Octavia 2018 FL, I would like to ask for a complete simplified procedure with vcds.

Is there a way to fix this? I had the same brand on my old MK3 Octavia and I didn't have a similar problem. I bought these recently and installed them, now I'm driving an Octavia 3 again but fl. I thought that when we code the system on ice, I would get a straight, non-variable current and this increase in light would disappear.

I reviewed the file you sent and I can't find anything in it about how to code regular headlights without lenses with an H7 halogen bulb to an H7 LED bulb so that the light doesn't increase when I press the accelerator pedal and the engine speed increases.

Can you explain the full procedure?

In my country there are no such regulations, my wife works in the police and there has never been such a problem when they stop someone. You can just wear whatever you want.

My headlight is a regular one with a reflector, there are other types that have a magnifying glass in front of the bulb. That's what I'm asking, how and in which channel should I do the coding with my vcds

The original ones are normal halogen bulbs, now I installed H7 LED from the brand Xstorm, my old Octavia had them and they didn't do this. That's why I want to recode it and make it glow normally.

Hello friends, I have a question for you, I have an Octavia 2018 and I replaced the normal halogen h7 bulbs with LED bulbs h7, but when I accelerate the light intensity changes, maybe I need to recode the low and high beams to LED. Please tell me how to recode the normal h7 halogen bulbs to LED h7 for my car step by step. The headlights are normal without loupes.

My vcds doesn't have this "meas block" menu, older cars do, but mine doesn't show it as active.

Hello, how can I reset the oil ash level in my dpf, is this amount too much and what is the limit before I replace it with a new one. I would be happy if someone who knows and has done it could answer. Second question, what is the ID of the vcds measurement block where I can see what condition my injectors are in. I searched but didn't find it. The car is a 1.6 tdi 116 hp engine code ddya 2019

I have a few more questions related to vcds, I would be happy if someone familiar could answer, I saw that my ash level (oil ash mass) is higher, I am not sure how current it is and how I can reset it, also how high it can be filled as a number before I have to replace it with a new dpf.

I saw the full procedure with vcds, I think that by changing the belt and water pump, maybe by winter I will also replace the temnost, in reality I bought the car from Germany 3 weeks ago and the timing belt was changed 10k kilometers ago but it was parked for about a year and a half, which makes me want to replace it again. The belt was changed at an official dealer there, with a change of antifreeze, etc. I read somewhere that we can check the condition of the antifreeze by measuring its pH, I have strips but I don't know what the exact pH should be. If you know, I'll be happy to share. And one more question, on which channel ID of vcds can I see how my injectors work and what are the normal values and in what unit of measurement they are, it is about 1.6 116 hp tdi code ddya

hello first of all i want to apologize for my bad english (i use a translator), i bought a 2019 octavia 1.6 tdi 116 hp (ddya) 5 manual transmission with a silicate bag, i removed the bag and replaced the entire expansion tank but i still haven't changed the antifreeze. i have a few questions. 1 can i drive safely with a g13 without a silicate bag and what could possibly happen? 2 how to properly drain the system to eventually replace it with a g12 evo (if there is a clip it would be even better)? 3 how many liters of coolant do i need for a g12 evo?