Jamesey

Where did you find the part number from your rear subframe

Hello I've got a 2009 octavia estate 2.0 tdi laurin and klement model but after looking underneath it seems that it needs a rear beam / subframe...mine is the type with the separate bolt on arb . Does anyone have a good one not too far from Sheffield area ...don't mind travelling....also does anyone know what the ebay none genuine ones are like ...mine has holes right next to where the rear bolts fasten the lower arms on and when driving on a motorway the rear seems to sway about ....the car is still on what looks like the original rear subframe at 225k Any help would be great thank you

Any need to talk to me as though I'm thick , I simply wanted to know what the noise was and I got my answer above about the run on pump .....no need pal

bought a 2019 fabia facelift model and wanted to know if the 14 to 17 model mk3 shared the same front wings , i need to repair mine ans im after a black wing , headlight and bumper , i can see the bumper and headlights are different but looking at the wing it looks the same

hi we have bought a 2019 fabia dsg s/a and after starting the car for a few minutes and then turning it off under the bonnet i can hear the anti freeze powering back into the expansion pot like theres a motor powering it after the engine is turned off , after a minute or so it stops , does anyone know if its a circulating pump and no need to worry , regards

Did a scan and nothing so not going to mess anymore as its doing my nut in....looking at a rcd 360 or going aftermarket with a double din , might be easier , I'd still probably need a canbus harness

Hi I especially bought a fabia bluetooth amundsen plus with the numbered mac address, now it's plugged it there's no option for bluetooth only a Aux 2 option , any clue on this little problem

Any idea what to search for regarding a bcm for let's say a 2013 fabia

Did you find one I'm reluctant to shell out £80 for a new one

Hi old thread but can you point me in the right direction of a easy plug and play emulator I have the rns315 and trying to fit it into a 09 plate fabia...I have all the same issues thanks

Thanks 👌

Replacement can like one of these

Hi it won't be me doing it but I'm trying to get any information to help him , can this coding be swapped to get my new radio to work properly 🙃

No not a greenline only a 1.4 tdi no dpf model

It's a fabia 2 basic model 2009 09 plate so no idea then , couldn't I just plug in a canbus box to convert it somehow. Would it need a different can controller to get it to 2.0 or is it a case of changing it in vagcom

I'm going on past experience with my last fabia when I took the speedo out and turned the key 🔑 that bricked my car . The vw specialist said the speedo head is the brains to the full electrical system

The canbus is built into the speedo head on these fabias

On the original loom? Can it just be updated to a newer canbus May have battery drain leaving it like this aswell but not sure yet as I've only just fitted it

Just fitted it and yes the radio stays on when the key is off and out

Thanks , is there no issues with the ignition off keeps the radio on

Hi my son has a fabia tdi 2009 with a dance cd player , he's wanting to swap it over to a amundsen + and wondered if it has Bluetooth built into this radio or will I need a skoda Bluetooth module then coding etc . I know we will need a GPS aerial but we can sort that ...many thanks

I bought my 2011 monte carlo with 205 50 17s fitted and they catch everywhere, turning left and right and going over bumps with 4 in the car, ruined my arch liners.

Yes very strange mate, im just hoping to get this number 4 recoded and my diesel knock and high mpg will be gone. If not its back to square 1, this pic is inj 4

Hi ive got an ongoing problem with diesel knock when 1k to 2k revs, very rough idle when cold and very very rough when its doing a regen. I thought id take pictures of the if the codes intop if the injectors and check the code adaptions of each on vagcom. 1,2 and3 are great and match but 4 injector says code A4JFGH but my injector 4 on vagcom says in pic below, really weird, cant alter it either, old copy of com i know.

Thanks