haris

15 January, 2023

Hi, with new brakes 340mm and lowered 3 cm ( I think...) with stx suspension.

It's 8x18 et 45.

I d prefer something 8.5 x 18 or et 40 by the way

7 September, 2022

Hi, I already know these things.

I will use the tow bar for a small simple bicycle stand, without taillights.

Also I don't have acc.

Parking sensors are aftermarket and I can install a on/off putting by myself

But my question is about the correct tow bar and the serial of the appropriate original

7 September, 2022

??? Isn't there someone who knows the serial of the towbaR ???

Any suggestions??

6 September, 2022

hi, i have a 1.4 140hp , model 2014 saloon.

should i choose skoda's tow bar or an aftermarket ?

i found these 2 serials, which seems the same and they are both suitable for octavia iii

5e9092155 and 5e0803881c . which is the correct?

also, if i choose the skoda's towbar or an aftermarket, i suppose i can buy whatever brand etc i want for the wiring harness. right?

sorry for my english if is bad

22 June, 2022

That's strange..

Nobody knows if seats are the same for sedan and caravan...???

21 June, 2022

Hi, I have a 2014 model 1.4

And I found a set of seats alcadara and leather.

1. Are the same for sedan and caravan??

I suppose front are the same, but what about the rear seats?

2 also important. Can I check somehow If the side airbags are OK or they opened etc..

27 May, 2022

8 hours ago, Damian@DPM said:

The front hub lip won't be as deep as the rear, we've found from experience that 10mm works on the front but 12mm+ is needed for the rear.

Damian @ DPM Performance

1 hour ago, MarkyG82 said:

It's the centering lip on the spacer itself. You don't generally get them on smaller spacers. Due to needing the lip on the hub I would avoid anything between 5 and 12mm (of the non-lipped variety) as you won't have enough hub lip protruding.

Up to 5 you should be fine. This is for front or rear depending on tyre clearance of course.

If i understood correct,

I can use non- hubcentric 5mm or less

Or if the spacer is hub centric,

I can use whatever I want..?

27 May, 2022

3 hours ago, Damian@DPM said:

The front hub lip won't be as deep as the rear, we've found from experience that 10mm works on the front but 12mm+ is needed for the rear.

Damian @ DPM Performance

Hi,

The front lip is 13mm.

It seems correct the spacer to be >=13

I don't know what to do

27 May, 2022

Hi,

I ve read somewhere that the minimum size for the front wheels must be 13mm wheel spacer due to a metal lip, which indeed make sense.

Something similar for the rear wheels.

But I see people using 5,8, 10,12mm etc

Without any problem .

26 May, 2022

On 21/05/2022 at 13:18, Baxlin said:

Well done. Obviously you took a brave pill! 👍

Is it appropriate to ask why you needed to remove it? (Just being nosey)

Extra trunk light Installation...

21 May, 2022

OK I did it!

2 metal and 2-3 plastic clips for a piece of plastic.

I had to pull very very hard

21 May, 2022

Hi,

Does anyone know how can I remove this plastic.??

2 May, 2022

Well, I tried it. It's still working with locked car..

So it seems a nice place to.hide the tracker

Now I must find out how to remove carpets and get 12v from the 12v socket

1 May, 2022

Yes I also thought of the 12v in the boot.

But I don't think it's working all the time if you lock the car for example

1 May, 2022

Hi,

I want to Install a gps tracker and it has 3 wires. + ,- and acc. I think acc isn't necessary.

Any ideas from where and how can I take 12v constant?

I don't want straight from battery , I don t want from the driver's fuse box. I need something different for obvious reasons. I need to hide the tracker somewhere and take 12v constant .

Also ,I see that I must add a 2A fuse somewhere in the middle.

29 December, 2021

Hi, does anyone know how much" power "

Can I take safely from dome?

I mean.. if I run a wire from dome and gives power to 10-15 watt led, will this be OK?

29 December, 2021

Hi,

I don't have light under the mirror now.

I want to have in the future 🙂

The same. I don't have red light on the door. its just a reflector

28 December, 2021

Hi, sorry for my English

I have a 2014 1.4 140hp and I asked from my mechanic to activate fogs with cornering.

He told me that my car does not support this. ( my board maybe is with lower specs)

My question is if I can activate these 2 or I will have the same problem

1. Retrofit led under side mirror

2. Warning red light on drivers door

Can I check somehow before do all the wiring and the job need?

For example if my car board does not support this, how can I understand?

Is it faded for example on vcds?

30 October, 2021

On 04/04/2020 at 12:51, DC04R said:

19 x 8j et48 autec wizard on a face-lift with H&R springs

Hi, have you installed wheel spacers???

25 September, 2021

I suppose you re right..

I found this...and was very clear

https://www.drive2.ru/l/543409708724126643/

A style is bigger . By the way never seen it on a car

B STYLE IS THE SMALL ONE AND IS CHEAPER

24 September, 2021

hi,

it is the small boot spoiler but there are 2 different codes

does anyone knows the differences?

i suppose one of them is smaller

(i need the super small. i think the 1.8 version has the small i want )

26 June, 2021

Hi, sorry for my English..

I found this clip on passenger's mat.

Any ideas where came from?

I don't see anything strange or out of its place

15 June, 2021

31 minutes ago, daragh26 said:

That looks awesome to me, saves all the fannying about trying to repair. Is it easy enough to install?

Where does the wire goes to..?

Also needs coding or not??

15 June, 2021

Vw pretoria reps 18" 18x8 et45

26 April, 2021

Hi,

Is there any octavia with 18"s vw pretoria wheels???

Profiles

Forums

Gallery

Shop

Events

Downloads

Posts posted by haris

Important Information