Phils80

now it seems to be even more strange. In my case I've left Leuchte 12 NL and Leuchte 13 NL as fog lights because I was to lazy to rewert them to original setting.... Strange, but good that it works !

Hi doggy007, thanks to langers2k I realized where was a problem. In FL cars you have LED fog lights which are not driven through same channels as before (when there were halogen fog lights). It was confusing because those channels are still present in adaptation, regardless that halogen lights are not possible to install anymore. Please try to change those channels instead Leuchte12NL, 13NL; Leuchte2SL, 3SL, 4TFL, 5TFL: Leuchte16BLK SLB35BLK SL KC9-Lichtfunktion B 16 --> Abbiegelicht links Leuchte17TFL R BLK SRB3TFL R BLK SR KC3-Lichtfunktion B 17 --> Abbiegelicht rechts I can tell you that cornering lights with led fog lights are helping a lot, so it is worthy to turn them on. It is good idea especially in cars without AFL as mine.

Hi, I was trying to find it, but I gave up. Does anyone has wiring diagram for door modules. My module is: Driver Part No SW: 5Q4 959 593 K HW: 5Q4 959 593 K Component: TSG FS 007 0485 rear Subsystem 1 - Part No SW: 5Q0 959 407 A HW: 5Q0 959 163 Component: FOND_FHSG_DRV 007 0010 Passenger Part No SW: 5Q4 959 592 K HW: 5Q4 959 592 K Component: TSG BFS 007 0485 rear Subsystem 1 - Part No SW: 5Q0 959 408 A HW: 5Q0 959 164 Component: FOND_FHSG_PSG 007 0010 I want to connect kessy handle antena, warning lights and lighting od interior handle. I will be thankful for prividing some schematics, pin-out, whatever...

Hi I just want to refresh a bit this topic. As I mentioned before I want to add kessy in driver door and tailgate (don't confuse with touch less opening - I want to open door by touch, but not using key). It seems It is possble to buy handle with antena: and antena to tailgate + wire harness: I have few questions: 1. I need to know where to connect them to door and tailgate drivers (pin numbers). 2. Additionally maybe someone knows where is antena placed in tailgate ? Where it is mounted ? 3. Is it enough to code it in door / tailgate drivers only or somewhere else also. (I have keyless start already) ?

Correct, sorry for confusing you. I haven't mentioned this fact in my first post. I assumed that it is standard in every Superb.

Thanks mfizz, looks quite complicated, but this passat is from 2015. I'm still hoping that my car has at least electronics able to support this system. I have start engine button, so interior antenna should be already installed, I'm not sure if my door controler is able to support handles with antenna, if yes it will be only a matter of connecting such a handle or antenna to it. I will send soon my auto scan by VCDS, there are all controlers listed. Maybe somebody can check...

Hi I'm suffering lack of keyless access especially on driver door and tailgate. Has anyone manual how to add it ? Is it enought to add only handle with antenna to door and antenna to tailgate and do some coding or adaptation ?

fergard are you using VCDS ? If yes, can you send me your lights adaptation map ?

So now I suggest to check if it is related to turning direction or side. If not I would suspect something in power steering or in steering system, if yes, more probable that it is somethng in driveshaft. Surly it is not something to ignore, definetly something is wrong. My personal feeling is that it is something related to driveshatft, because it seems to happen when this driveshaft is loaded significantly...

Really strange, frequency is much bigger than wheel rotation , for me driveshaft or power steering. It only happens with a turn doesn't it ?

Hi fergard, "Basic LED" is the simplest lamp in Superb MKIII after FL it is like halogen with mirror, but instead of H7 bulb there is LED lamp, so you don't have autoleveling and you need to adjust lighting hight when you travel with loaded trunk. Of course it is much better than H7, it has more than 4500 lm. I agree with thousandsons - it is really annoying having incandescent bulb below the lamp. I have no idea why they did that. It seems to not be an issue of model level, matrix led has the same...

Hi, Doeas anyone knows if there is any possibility to configure head light DRL in Basic LED head light to work as turn signal. In other lamp models when DRL are activated turn signal is alternated with day light. In Basic LED head light there is turn signal light below with incandenscent bulb. I'm wondering if it is possible to force DRL to work as turn signal in orange color: I have this: I want this: Question if it is possible to activate by adaptation ?

Hi, not sure if can help without hearing real noise, but I was suffering similar issue in Superb II, finally it turned out that it was bearing. My case was at milage 200k km. I was driving diesel so this noise was "covered" by engine noise on highways, but noticable during driving with lower speeds. Of course I assume you have checked your brake pads .

Awsome . Thanks a lot langers2k, that's it ! It seems all aviable adaptations are for halogens, when FL models are with LED, but I'm wondering why they left 12NL and 13NL A function set as fog light while FL cars are delivered only with LED ones... Probably no one exept guys from Wolfsburg can answer...

Hi Langers2k Yes, originally both were set to not active. Some lines in Polish, I hope you will be able to identitfy . adpmap-09-5Q0-937-086-CE_VIN-2100.CSV

Hi, I'm planning to add some functions in my car using VCDS, as I'm quite fresh in using this tool, so I decided to start from theoreticly simple things to train a bit. I decided to turn on fog lights as cornering light and... ...I hit the wall .... I've tried verified coding (in fact adaptation) found on different forums including briskoda: I'm using VCDS version 20.4.1 Here are controler details (in this version of controler there is no coding, but all was moved to adaptation as far I know) Address 09: Cent. Elect. (J519) Labels: None Part No SW: 5Q0 937 086 CE HW: 5Q0 937 086 BQ Component: BCM PQ37BOSCH 038 0303 Serial number: J53F26012000QJ Coding: 000000000000000000000000000000000000000000000000000000000000 ASAM Dataset: EV_BodyContrModul1UDSBosc 020001 ROD: EV_BCMBOSCH_020.rod VCID: 7F0DB6FBE6FD757E73-802A after choosing 09-Central Electronics and entering security code 31347: Leuchte12NL LB45-light B12 : not active -> Abbiegelicht links Leuchte13NL RB5- light B13 not active -> Abbiegelicht rechts then I checked if conditions for cornering lights are correctly set in other corelated adaptation channels: IDE03638-IDE04231-static AFS light-Steering wheel angle: offset,-0.3 °, IDE03638-ENG116677-static AFS light-Abdimmgeschwindigkeit,25.0 %/s, IDE03638-ENG116673-static AFS light-bei Rueckwaertsfahrt,both sides , IDE03638-ENG116675-static AFS light-Lower speed threshold,0.0 km/h, IDE03638-ENG116682-static AFS light-Maximaltemperatur,100.0 °C, IDE03638-ENG116679-static AFS light-obere Grenztemperatur,95.0 °C, IDE03638-ENG116681-static AFS light-Oberer Lenkradwinkel,65 °, IDE03638-ENG116680-static AFS light-untere Grenztemperatur,80.0 °C, IDE03638-ENG116678-static AFS light-Unterer Lenkradwinkel,40 °, IDE03638-ENG116676-static AFS light-Upper speed threshold,40.0 km/h, IDE03638-ENG116674-static AFS light-Vorschrift,ECE R119 , IDE03638-ENG115830-static AFS light-Zeitwert Einschaltzeit Abbiegelicht,15 min, Unfortunetly it seems to be not succesful with FL version. What is really strange it that I have checked with VCDS advanced measurments how controler is reacting on steering wheel turns and it seems everything works correctly (my version in Polish, so most of you have to belive me, but underlined line is showing Puls Duty Factor for left fog light): After turning wheel, AFS signal become active, duty factor is 100% and plug number is exactly the same as for fog light. But all this is not reflected in real light behavior. I've tried reseting lights options in car setting to factory defaults, also I was waiting 30 min allowing CAN to go into sleep mode... no changes. Can anyone help me with those adaptations in FL version, it seems something has changed in FL and probably some additional adaptations / coding has to be done, maybe in CAN Gateway ? Thanks in advance for any help.

Hi ! First thanks for grate forum. I'm driving Skodas since 1998. Since 3 months I'm driving Superb III MY20 FL unfortunetly due to some circumstances I was forced to choose "272 PS sleeper" in ACTIVE version, so as easy to guess I've started looking for some possible upgrades, because its equipment is much poorer than my Scout version of Superb MKII I used for 5 years.