DakinHB

@Baxlin I think all the setting buttons disappear once the car starts moving. The other thing I have noticed is if I'm stationary and I place my hand near the screen the buttons reappear. Not sure if there's a sensor or its detected your stationary and so may want to change the settings . I think you can hide the car image by pressing the [ button, and just tap the screen to get it back again?

Thanks! This worked a treat and mine is now behaving normally despite the colder weather. Does anyone know if this problem persists on the 8inch face lift screens? Tempted to upgrade.

Looks like I managed to fix the issue by playing around with the picture settings, i.e. brightness, contrast etc, (perhaps initial setup registration) then went for a drive and now the menu doesn't stay up permanently. The other thing I did was clean my amundsen head unit as described in other threads as I had been having issues where it wouldn't register my touch or it would think I was touching the screen when I wasn't/

Thank you everyone for this thread. Incredibly helpful in getting my reverse camera fitted

Read through all 80+ pages, this build is great! Inspired me to start modding my Octavia but not sure I'll be quite as adventurous! Thanks for all the details on your mods

Hi, I have a very similar issue. I just installed the reversing camera from aliexpress: https://www.aliexpress.com/item/4000230897829.html?spm=a2g0s.12269583.0.0.291d299fXIJHwU However, whenever I select reverse gear I get the image displayed in your second picture and the box on the left with various buttons never disappears! I was hoping I would get a display the same as your first picture but the buttons block some of the image Is this also likely to be a firmware issue or do I need the long coding via odbEleven? The camera I have used is meant to be a plug and play, but I find it frustrating that the menu items never disappear once I am in reverse gear. Any help would be very much appreciated! Thanks,