G2EO

Ok... so I just need to put them back for sale Thanks for the reply @xman and @chimaera

I know that, but I don't like to have halogen bulbs next to the xenon. It's really weird to have something so modern like the xenon next to an old fashion bulb I found this video on YT does anyone have already test this ??

Hello everybody, I used the research function but sadly I couldn't find any answer to my problem :( I have recently installed some Philips Xtreme Ultinon Gen 2 H7 LED (with can bus module) instead of the classic halogen light bulbs in my skoda superb facelift 2014 but when I turn the ignition on, the instrument cluster tell me to check those bulbs :( I clear the error code with VCDS but every time I switch ignition off and on it come back. Is there a way to disable the check of thoses lightbulbs because apparently the canbus module doesn't work. I apologise for my english ^^

Do you know if the Odis cable (version 6154) works with VPC ? Or do I need to buy a VCP cable also ?

Mine is from 12/24/2013 I supposed it's support the LED because I have OEM LED rear tail light. Do you have the process to do it via ODIS or VCP ?

Hello, You should watch this vidéo : I'm pretty sure your issue is the same as the one mentionned in the video just need to replace the sensor

I post a message because I'm curisous sorry I didn't have answers. I tried also to fit LED Bulds (with canbus resistances) but I still had the default on the dash so I removed them waiting to find a solution.

Yep, I had a problem with a shore to ground and inversion between pos 8 and 43

Quick post to whish you all a happy new year! And also give you some updates I finaly succeed to find where was the issue in my wiring and could fix it, so everything is fine now! Thank you so much for you help

A huge thanks for the wiring diagram! I'll look at it closely! @LuPuS Thanks @chimaera also for your correspondant table it'll be precious ! @3T51704x4I totally agreed with you concerning buying the parts for your car. That's what I was thinking ordering the first kit but when I opened the package I was really surprise to see that I've made a mistake for just one digit (3 instead of 4) in the ref. Sorry but what's the acronym TPS for ? I'll check all the tracks you gave me to resolve this mess ^^

Ok i'll try to look at the 13 pins if there's something wrong. Do you have any wiring diagram for the trailer ECU ?

Where did you connect the three wires going to 43 44 and 45? The 3 wires goes in one which is plugged in the permanent live feed Sorry I didn't finish my sentence ^^

Thanks for your reply! I aswered your question inside the quote

Hello, I have a big problem with my OEM installation. I ran out of battery since i've installed the tow bar. So I've install a new battery and took some mesures. I've follow once again all the tutorial of @Lutzwhich is really complete and I have done all the same wiring. But i took mesures with a multimeter of which fuse is causing a drop of power (didn't know the english word sorry :s ) and it appears that when I remove fuses in position 44 (20 amp) and 45 (15 amp) the drop of power stop. Could you help me please and explain why I have a consumption of power when those two fuses are back in place ? Normaly when your cars is closed with all lights off etc your multimeter must indicate between max 0.05mAmp and min 0.01mAmp. For me with the fuses back on the multimeter indicate 3.7Amp Could someone help me please ?? Best regards!

This is what is in the long coding helper BYTE 0 : 00 control module not coded/ 01 rest of the world/ 02 North American Region/ 03 Australia BYTE 1 : 00 control module not coded/ 0D Type/ Swiveling Function: Fixed/ detachable/ Preparation [PR-1D1/1D2/1D7] BYTE 2: no info BYTE 3 : 00 terminal 30 Output switched (Pin 9) NOT active/ 01 terminal 30 Output switched (Pin 9) active/ 02 terminal 30 Output switched (Pin 9) active while Trailer connected BYTE 4 : 00 terminal 30 Output (Pin 10/Chargin Relay) NOT active/ 01 terminal 30 Output (Pin 10/Chargin Relay) active [OLD]/ 02 terminal 30 Output (Pin 10/Chargin Relay) active while Trailer connected/ 01 terminal 30 Output (Pin 10/Chargin Relay) active [NEW] BYTE 5 : no info BYTE 6 : no info BYTE 7 : no info