IceSpawn

yes all buttons work. but you have to coding them with vas. Dumitru Sabin Mihai from Facebook helped with the coding. Write to him privately on Facebook

https://www.cars-equipment.com/en/shop/radio-adapter-can-bus-decoder-22/canbus-adapter-reduction-for-steering-wheel-2/ from here I got the mod. I took the full one. not the basic one. the full one is better. but you can write them an email and tell them what it's about, it would help you.

https://www.cars-equipment.com/en/shop/radio-adapter-can-bus-decoder-22/canbus-adapter-reduction-for-steering-wheel-2/

OK. I will try your version. but when it warms up. that in the winter the plastic becomes brittle and I'm afraid to try not to break the plastic.

Hi. did you succeed or find how to remove the fog light? I have the same problem with a 2021 SS3. can you help me too. thank you

Talk to Dumitru Sabin Mihai on Facebook. He has done everything. He is able to tell you what you need or what you need to do.

Dumitru Sabin Mihai helped me with the coding, you can find him on Facebook. Or Instagram https://instagram.com/mqbcodero?igshid=YmMyMTA2M2Y=

I also changed the steering wheel to a 2020 Ss3. And I installed this module and all the buttons work. But the first time the steering wheel must be coded on the car without this module. then the module is installed.

https://www.cars-equipment.com/en/shop/radio-adapter-can-bus-decoder-22/canbus-adapter-reduction-for-steering-wheel/

Talk to MQBcodeRO on instagram https://instagram.com/mqbcodero?igshid=dujhbeic9bo8 and help you

You need to have odis engineering. Write MQBcodeRO on instagram and fix yourself. You have to give him access through TeamViewer. That's what you need Odis.That's my 2020 car manufactured. Bought in 2021 2.0 petrol 190 horses

https://www.instagram.com/p/CM7ftA9nI-N/?igshid=inwij9wbpuri

Hello. I'm new here. And I'd like to know if anyone can help me with me is doing fitting the red lights on the back doors to a Skoda Superb 3 facelift from 2020. I didn't draw the wires just has the cat's eye on the doors. I don't know where the wires should be drawn from and if I need to activate something with vcds. Thanks