Rossgird
New here-
Posts
5 -
Joined
-
Last visited
Profile Information
-
Interests
Cars, cycling, kayaking
-
Location
Dolgellau, wales
Car Info
-
Model
Skoda yeti 2.0 tdi se
-
Year
2013
Recent Profile Visitors
290 profile views
Rossgird's Achievements
-
Hi, appologise if this is in the wrong place, I have read extensive topics regarding similar issues but not the same if you understant what I mean. Started with abs, traction control and steering lights being thrown up as a fault. On diagnosis pointed to left front abs sensor/ reluctor ring or wiring issue. I removed the sensor, which was full of grease and muck, the only place the grease could have come from was a failed bearing, mechanic agreed, so replaced the bearing with a new one, as well as replacing the abs sensor, problem still there, I have checked the wiring to the sensor and it appears fine. The problem is intermittent, I have also checked the battery as apparently a bad battery can throw up errors. On a run up a hill today there was a dip/hesitation in power, I saw the abs light flick on briefly then all returned to normal. I have noticed as of late there is a hesitation under acceleration at times. One other thing, the drivers side door wiring harness has an issue with broken wires, I will be repairing this in the next day or two, could this maybe creating an issue with wires possibly shorting out. The problem also seems to disappear the longer I drive. many thanks.
-
Thanks, problem solved, I think it was when the drivers door harness was removed, it triggered an intermittent error code which has now been cleared and all fine, thanks for all the replies.
-
Thank you, I used and obd11 reader and it did not show any error codes, I was repairing the drivers door wiring harness and now the indicator in the wing mirror is also not working, doubt it is related. I will try and get a proper vcds reading.
-
Hi I am trying to find the airbag control module on my yeti, I disconnected the battery to do some wire repairs, and now the airbag light is on and will not reset, no errors coming up on vcd read, so was going to try and swop out the module, is this feasible or am I possibly missing something here.
-
Hi, new to the forum sorry if in wrong place, I need to replace the drivers door wiring harness in my yeti 2.0 tdi 2013, I believe there was a revised one, does anyone know the part number please.