Everything posted by Herbalthought
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
Thanks very much it is currently ****ing down so i may have to give this a go tomorrow and i will report back
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
Ive jsut been out and checked all the wires in the new struts and they are all fine. Sorry i am not sure what i should check here or where it is ? I had a look in obd11 to see if there was something i should do but i had no idea what to do so didnt do anything in case i messed it up Do you have a guide or a post that tells me what settings to do in obd11?
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
https://recall.skoda-auto.com/004/en-com Thanks JR RS just checked for recall on the above link and sadly i am not in that recall
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
I've installed brand new ones so faulty wiring isnt the issue
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
Internal cables inside car were all ok and still clipped in with no damage to them so it isnt a broken cable inside
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
No errors using obd11 I tried it multiple times with bootlid open a bit and fully open etc and still no faults I still dont understand why i should check the wires on the old struts AMD87?
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
I have changed the struts so the wiring is not in question since its new struts on there. Does anyone know if there is a control module ? Maybe that is my problem?
-
Still have fault after replacing rear boot struts - Still wont open fully and wont close at all
So i jsut replaced my rear electric boot struts on Estate I had the fault where you have to press boot open about 5 times to get the boot to open fully but when closing even though it didnt close i got the sound that it tried when pressing the close button inside boot lid Now i have replaced the struts it still takes 5-6 times to open fully and now i dont get any sound when using the inside boot switch So i have gone backwards after replacement? I have obd11 and it shows no faults on boot lid? I have tried searching both here and on google but no luck thus far.
-
Axle load vin plate location
Thanks Langers, somehow i missed it as it is literally behind the rear door as you have shown. usually they are in front of the pillar.
-
Axle load vin plate location
Hey all, I am wanting to know where the similar plate is on a Mk3 superb ? Usually on or around door pillar but i cant see one does anyone know where it will be? Or even how i can find out my load rating for my front axle so i know what eibach springs to buy.