CanuckianOz

Hi all, Thanks for the informative guides. I managed to install these on our 2021 Karoq in max 90 min without taking the wheels off. Back was super easy. For the push rivets, I recommend buying a set of plastic removal tools (like this) in addition to the soap trick. Only took maybe 30 seconds for each one. For the front wheels, I cranked the wheel all the way over to access the front drill hole area then ranked it the other way to get to the back one. Just used a cordless Ryobi drill, fit fine. Used a 6mm wood drill bit but took a while and was worried about over drilling it. The u-clamp on the underside was confusing as the supplied diagram is crap.

Hi all, Just wanted to say thank you for the informative guides. Helped me get it done on our 2021 Karoq. Did the electrical first with a piggyback fuse and 12V to 5V converter that I got for $20 and installed the rest after feeding the cable from the glove box out the removed side panel, then mocking up the cam on the glass and hiding away all the wires. Highly recommend that you go buy the car plastic removal tools so you don't damage anything. Helpful for the entire process to get things open etc. Installed a Viofo A119 V3.