-
Air recirculating flap malfunction
Hello everybody. As promised, I return with my feedback after yesterday's visit to my engineer: The motor of the air recirculation flag was burnt due to resistance in the movement of the flap imposed by some loose cables of the OEM multimedia screen that I installed 1 year ago... Unfortunately, it is a common practice when a technician performs a job not to pay attention if all workspace is clean and tidy after the completion of the job....
-
Air recirculating flap malfunction
Thanks a lot for the info. In any case, next week I will visit my Skoda engineer and I will revert with the findings when finished.
-
Diagnostic error message
Mabye you are right, since I have replaced my infotainment system with an OEM (Digital-IQ), so there might be some communication error. Anyway, thanks for your assistance.
-
Air recirculating flap malfunction
Dear PetrolDave, I did not try to move the flap by hand. Moreover, the axis of the motor could not be moved by hand. I also opened the motor and inspected the gears. I did not see any worn teeth.
-
Diagnostic error message
Dear Fabdavrav, I do not know to be honest what has happened, but I do not remember facing any problem recently with the car (apart from that with the air recirculation flap motor that I have posted separately). Moreover, no any warning light switched on. Can you pls advise me further because I am not familiar with these fault codes (the diagnostic tool was not mine)?
-
-
Air recirculating flap malfunction
Dear all, I am facing the following strange problem with the air recirculating flap motor: Duting the last 2 months I have noticed that the aforementioned flap is not moving (either open or close). Today I removed the motor to check if it is working OK and I found out that it is OK. I put it back in place and retested it again with success. As soon as I assembled the glove box, the flap motor stopped working again. Does anybody have any idea why this is happening? FYI the back of the glove box does not touch the motor. Moreover, not any cables touch it.
-
Diagnostic error message
Dear all, Can somebody explain what exactly is the below diagnostic error identified today after checking my car: Car Scanner ELM OBD2 DTC report Selected brand: Skoda VIN: ============1============== 66052 Raw code: 010204 ECU: 19. CAN Gateway[Archive (inactive)] Status: Confirmed Skoda: U006500: Vehicle Communication Bus E Performance Status bits: 1 Priority: 2 Frequency: 167 Unlearning index: 60 Odometer: 43735 km Date, time: 2021.10.18 08:23:20