jps711

Finally got the fault repaired turned out the wiper motor had seized. Removed motor plenty of WD40 and working again. Decided though to get rid of the car.

Fuse 10 is fine the rear wiper & screen wash are working fine so power is getting through to ther stalk. Thanks for the suggestion

Thanks for the info I will check it asap

Hi No I checked 26 & 44 front & rear wipers What is fuse 10 for?

No the wipers are completely dead at any speed

Hi guys back with more problems unfortunately. I don't know if thesee faults are related in anyway. 1st the drivers door window has started to only work intermitantly I know it isn't the wiring as this was checked repaired not long ago & a different motor fitted (Thanks Pete ) 2nd yesterday I went to use my front wipers and nothing happened which was unfortunate as I was driving and had just sprayed the screen. The screen wash is working (obviously) and the rear wiper is working. I have checked the fuse and that is fine. Does any one have any suggestions as to what could be causing the problems & how to repair them myself cheaply. Cheers Jim

Now sorted found one to fit on ebay https://www.ebay.co.uk/itm/115033366604?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 He has quite a range of different wheel nut keys if any one else finds they need one. Thanks for all the replies

Yes I looked

Cheers Pete coming to the rescue again

Unfortunately there is nothing written down

LOL Cheers Ken

Hi Guys Just had the car in for its mot & service & they couldn't find the wheel nut key. The last time it was used was at the garage last year when they did the mot & service, which I told them but they said they put it back. Any way I now have no key after doing a full search of the car. Does anyone know which key it is by looking at the attached photo. Any help appreciated. Cheers Jim

It looks like the wiring problem is getting worse with the window nolonger working with the key 😞 I am going to search online to see how cheap I can find a new full harness for the door.

Just checked it again & the windows are nolonger working when I hold the key in the open position in the lock.(they did work a couple of days ago) I dont know the part number for the window module as I havbent had chance to remove the door panel. Yes it is the 2012 fabia mentioned in my profile.

I do know though that the motor works by operating it with the key in the door. The window goes up & down depending on how I turn the key. So would I be right in assuming the the thick red/wite/yellow & the thick brown cables are fine.

Cheers Pete it gives me some thing to do this weekend :)

I am going to take off the door panel and check all of the cables. At the connector and bellows all of the wires appear to be fine apart from the 2 broken ones. I have searched online but haven't found a wiring guide for the car showing whick cable is which in the door harness. Thanks for your help Pete. Cheers Jim

Passenger side mirror is fine. Thats exactly what I meant NO click or clunk

I rechecked the mirror when I was just out to take the photos & it is working fine. Just listened and there is click or clunk at the motor the only sound is the switch itself just doing is normal sound.

Hi Just managed to check it the green wire is 4 up from the bottom the white/blue is 6 up from the bottom Both on the steering wheel side of the connector.

Hi Pete Thanks for the info I will have a look tomorrow when I get chance to see what numbers they are. (are they numbered?) The mirror adjustment is working fine the only thing not working is the drivers side window. Cheers Jim

Hi I have also got broken wire syndrome with my drivers side window not working. The broken wires are the green & the white/blue ones. I cant afford a new harness so I am going to add an extra piece of wire between the breaks. Can any one tell me what thickness of wire I would need 1mm or 0.5mm Cheers Jim