raz2

i want to power this up the bcm and connect to it using vcdss and also make it work with an instrument cluster. The only wire i have found is ground wich is a brown wire. The can bus and the k-line diagnostics wire are on the white plug. Does anybody have a pinout for it?

some time ago i posted a thread about climatornic pinout as it wouldnt turn on no matter what. anyways i took the car to a mechanic said he climatronic is broken replaced and still same issue. it does turn on but fan dosent work ac dosent work almost nothing works. code is 5J0 907 044 C. Im wondering if someone has a wiring diagram for power and fan and other things. also i found a pinout on a site but its for older climatronic with three plugs the plugs on mine has only two plugs C and B

yes i managed t odo that but i also want to connect the ecu

i did but i didint find anything

a so there is alos this cna bus on ecu( i think this might connecxtx to cluster) . And the pins at bsg for cluster are 2 and 5

yeah but when i connect thenm like that the cluster fraks out

no i have pins 2 and 3 that go to the ecu. THats the can bus for ecu

no i want it to connect to cluster. First it need to go thru can gateway that is integrated in bsg unnit above clutch pedal then from the unit in goes in the cluster yes i have the wake up pin connected the can for cluster is working but for tyhe ecu is dead for some reason

okay so when i connect the pins to the pins on the 2 and 3 pins on bsg nothing happenes ( and on those pins on the bsg there is no voltage) any idea? shoould be can bus voltage

right now im trying to connnect the ecu to the gateway

i know them already

yes but i already figured iut the other one. Also i want to connect the ecu to the unit but the ecu has 3 can busses and i yhink i need the power train can but i dont have the pin (if it helps its a magneti mareli 036 906 034 BL )

thanks

thanks a lot. I already connected it to the cluster and powered it up but thats all i could do since there is little to nothing information on that unit(even a full pinout will help if you have one)

so basically i mean the unit above the clutch pedal yes and i want to try to conenct to it using vcds ( i only have the module on bench) and im asking if i need can bus to connect to it or k-line if yes what pin would it be

i want to connect to the bsg unit using vcds but i dont know if i need k-line or can bus. Also i want to connect the ecu to the bsg that has the integrated can gateway but the can bus wires for the gateway are dead, i cheked them with a multimeter and theyre 0 volt(im wonderig if there are other power pins for the gateway)

i dont think it shows the ecu

im looking to connect some senzors and the throttle to have some fun with the ecu

i cant seem to find the wire for the fuel volume, in another post a made some time ago i saw that the fuel and speedo is sent via analog. The serial thing is 6Y1 919 880 C B41

yes

it was an elegance vejicle so it had this function

i know th ewire of the light but i dont seem to get it to trigger

ok thanks